Filter :
Standard and/or project | Stage | TC |
---|---|---|
Layout for a standard method of chemical analysis
|
95.99 | ISO/TMBG |
Layouts for standards — Part 2: Standard for chemical analysis
|
95.99 | ISO/TC 47 |
Chemistry — Layouts for standards — Part 2: Methods of chemical analysis
|
90.93 | ISO/TC 47 |
Guide on the form for standards for chemical products and for methods of chemical analysis
|
95.99 | ISO/TC 47 |
Liquid chemical products for industrial use — Determination of density at 20 degrees C
|
90.93 | ISO/TC 47 |
Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method
|
90.93 | ISO/TC 47 |
Determination of water — Karl Fischer method (General method)
|
90.93 | ISO/TC 47 |
Volatile organic liquids for industrial use — Determination of distillation characteristics
|
90.93 | ISO/TC 47 |
General method for the determination of arsenic — Silver diethyldithiocarbamate photometric method
|
95.99 | ISO/TC 47 |
Standard layout for a method of chemical analysis by gas chromatography
|
95.99 | ISO/TC 47 |
Sampling of chemical products for industrial use — Safety in sampling
|
90.93 | ISO/TC 47 |
Surface chemical analysis — Scanning probe microscopy — Guideline for the method and procedure for determining the temperature effects on AFM dimensional measurements
|
40.00 | ISO/TC 201/SC 9 |
Inorganic chemical products for industrial use — General method for determination of chloride content — Mercurimetric method
|
95.99 | ISO/TC 47 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
|
60.60 | ISO/TC 201/SC 7 |
Gas analysis — Calibration gas mixtures — Certificate of mixture preparation
|
95.99 | ISO/TC 158 |
Gas analysis — Calibration gas mixtures — Certificate of mixture preparation
|
95.99 | ISO/TC 158 |
Gas analysis — Requirements for certificates for calibration gases and gas mixtures
|
95.99 | ISO/TC 158 |
Gas analysis — Contents of certificates for calibration gas mixtures
|
90.93 | ISO/TC 158 |
Gas analysis — Contents of certificates for calibration gas mixtures — Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017
|
60.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for Class I mixtures
|
90.93 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for Class I mixtures — Amendment 1: Corrections to formulae in Annex E and Annex G
|
60.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
|
60.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Weighing methods
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Weighing methods — Addendum 1
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Gravimetric method
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Gravimetric method — Amendment 1: Liquid introduction
|
95.99 | ISO/TC 158 |
Gas analysis — Determination of composition of calibration gas mixtures — Comparison methods
|
95.99 | ISO/TC 158 |
Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
|
90.92 | ISO/TC 158 |
Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
|
40.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Static volumetric methods
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Static volumetric method
|
90.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Dynamic volumetric methods — Part 1: Methods of calibration
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 1: Methods of calibration
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 1: General aspects
|
90.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 2: Volumetric pumps
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 2: Piston pumps
|
90.20 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Dynamic volumetric methods — Part 3: Periodic injections into a flowing gas stream
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Dynamic volumetric methods — Part 4: Continuous injection method
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 4: Continuous syringe injection method
|
90.93 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 5: Capillary calibration devices
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 5: Capillary calibration devices
|
90.20 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Dynamic volumetric methods — Part 6: Sonic orifices
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 6: Critical orifices
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 6: Critical flow orifices
|
90.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 7: Thermal mass-flow controllers
|
90.93 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 8: Diffusion method
|
90.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method — Technical Corrigendum 1
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
|
90.20 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
|
90.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11: Electrochemical generation
|
90.60 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Manometric method
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Saturation method
|
95.99 | ISO/TC 158 |
Chemical products for industrial use — Sampling — Vocabulary
|
90.93 | ISO/TC 47 |
Chemical products for industrial use — General method for determination of chloride ions — Potentiometric method
|
90.93 | ISO/TC 47 |
Chemical products for industrial use — General method for determination of traces of sulphur compounds, as sulphate, by reduction and titrimetry
|
90.93 | ISO/TC 47 |
Gas analysis — Preparation of calibration gas mixtures — Permeation method
|
95.99 | ISO/TC 158 |
General method for determination of silicon content — Reduced molybdosilicate spectrophotometric method
|
95.99 | ISO/TC 47 |
Gas analysis — Determination of sulphur dioxide — Part 1: General guidance for the choice of methods
|
95.99 | ISO/TC 158 |
Gas analysis — Determination of carbon dioxide — Part 1: General guidance for the choice of methods
|
95.99 | ISO/TC 158 |
Chemical products for industrial use — General method for determination of iron content — 1,10-Phenanthroline spectrophotometric method
|
95.99 | ISO/TC 47 |
Gas analysis — Checking of calibration gas mixtures by a comparison method
|
95.99 | ISO/TC 158 |
Gas analysis — Sampling and transfer equipment for gases supplying an analytical unit
|
95.99 | ISO/TC 158 |
Gas analysis — Preparation of calibration gas mixtures — Mass dynamic method
|
95.99 | ISO/TC 158 |
Thiourea for industrial use — Part 1: Test methods
|
60.60 | ISO/TC 47 |
Thiourea for industrial use — Part 2: Specifications
|
60.60 | ISO/TC 47 |
Gas analysis — Vocabulary
|
95.99 | ISO/TC 158 |
Gas analysis — Vocabulary
|
95.99 | ISO/TC 158 |
Gas analysis — Vocabulary
|
90.93 | ISO/TC 158 |
Evaluation of the performance characteristics of gas analysers
|
95.99 | ISO/TC 158 |
Chemical products for industrial use — Sampling techniques — Solid chemical products in the form of particles varying from powders to coarse lumps
|
90.93 | ISO/TC 47 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis
|
90.60 | ISO/TC 201/SC 7 |
Surface chemical analysis — Scanning-probe microscopy — Measurement of drift rate
|
90.93 | ISO/TC 201/SC 9 |
Surface chemical analysis — General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
|
90.92 | ISO/TC 201/SC 8 |
Surface chemical analysis — General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
|
40.20 | ISO/TC 201/SC 8 |
Surface chemical analysis — Scanning-probe microscopy — Determination of cantilever normal spring constants
|
90.93 | ISO/TC 201/SC 9 |
Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
|
95.99 | ISO/TC 201/SC 9 |
Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
|
90.93 | ISO/TC 201/SC 9 |
Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of arsenic in silicon
|
90.93 | ISO/TC 201/SC 6 |
Gas analysis — Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
|
90.60 | ISO/TC 158 |
Gas analysis — Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration — Amendment 1: Correction to Formula 5
|
60.60 | ISO/TC 158 |
Surface chemical analysis — Scanning probe microscopy — Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
|
90.93 | ISO/TC 201/SC 9 |
Surface chemical analysis — Secondary-ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
|
95.99 | ISO/TC 201/SC 6 |
Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
|
90.92 | ISO/TC 201/SC 6 |
Surface Chemical Analysis — Atomic force microscopy — Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
|
90.93 | ISO/TC 201/SC 9 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis
|
90.93 | ISO/TC 201/SC 7 |
Gas analysis — General quality aspects and metrological traceability of calibration gas mixtures
|
90.93 | ISO/TC 158 |
Gas analysis — General quality assurance aspects in the use of calibration gas mixtures - Guidelines
|
95.99 | ISO/TC 158 |
Surface chemical analysis — Characterization of nanostructured materials
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Characterization of nanostructured materials
|
60.60 | ISO/TC 201/SC 7 |
Surface chemical analysis — Secondary-ion mass spectrometry — Determination of boron atomic concentration in silicon using uniformly doped materials
|
95.99 | ISO/TC 201/SC 6 |
Surface chemical analysis — Secondary-ion mass spectrometry — Determination of boron atomic concentration in silicon using uniformly doped materials
|
90.93 | ISO/TC 201/SC 6 |
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials
|
95.99 | ISO/TC 201/SC 4 |
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials
|
95.99 | ISO/TC 201/SC 4 |
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials
|
60.60 | ISO/TC 201/SC 4 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
|
90.60 | ISO/TC 201/SC 7 |
Surface chemical analysis — Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
|
95.99 | ISO/TC 201 |
Surface chemical analysis — Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
|
90.93 | ISO/TC 201 |
Surface chemical analysis — Glow discharge optical emission spectrometry (GD-OES) — Introduction to use
|
95.99 | ISO/TC 201/SC 8 |
Surface chemical analysis — Glow discharge optical emission spectrometry (GD-OES) — Introduction to use
|
95.99 | ISO/TC 201/SC 8 |
Surface chemical analysis — Glow discharge optical emission spectrometry (GD-OES) — Introduction to use
|
60.60 | ISO/TC 201/SC 8 |
Gas analysis — Conversion of gas mixture composition data
|
90.92 | ISO/TC 158 |
Gas analysis — Conversion of gas mixture composition data — Technical Corrigendum 1
|
60.60 | ISO/TC 158 |
Gas analysis — Conversion of gas mixture composition data
|
50.00 | ISO/TC 158 |
Surface chemical analysis — Information formats
|
90.93 | ISO/TC 201/SC 3 |
Surface chemical analysis — Data transfer format
|
90.93 | ISO/TC 201/SC 3 |
Surface chemical analysis — Glow discharge mass spectrometry (GD-MS) — Introduction to use
|
95.99 | ISO/TC 201/SC 8 |
Surface chemical analysis — Glow discharge mass spectrometry — Operating procedures
|
90.92 | ISO/TC 201/SC 8 |
Surface chemical analysis — Glow discharge mass spectrometry — Operating procedures
|
50.20 | ISO/TC 201/SC 8 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Description of selected instrumental performance parameters
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Description of selected instrumental performance parameters
|
90.93 | ISO/TC 201/SC 7 |
Surface chemical analysis — Auger electron spectroscopy — Description of selected instrumental performance parameters
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Auger electron spectroscopy — Description of selected instrumental performance parameters
|
90.93 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectrometers — Calibration of energy scales
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectrometers — Calibration of energy scales
|
90.93 | ISO/TC 201/SC 7 |
Gas analysis — Investigation and treatment of analytical bias
|
90.60 | ISO/TC 158 |
Surface chemical analysis — Depth profiling — Measurement of sputtered depth
|
95.99 | ISO/TC 201/SC 4 |
Surface chemical analysis — Depth profiling — Measurement of sputtered depth
|
60.60 | ISO/TC 201/SC 4 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
|
90.60 | ISO/TC 201/SC 7 |
Surface chemical analysis — Recording and reporting data in Auger electron spectroscopy (AES)
|
90.93 | ISO/TC 201/SC 2 |
Surface chemical analysis — Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
|
90.93 | ISO/TC 201/SC 2 |
Surface chemical analysis — Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
|
60.60 | ISO/TC 201/SC 2 |
Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
|
95.99 | ISO/TC 201 |
Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
|
60.60 | ISO/TC 201 |
Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
|
95.99 | ISO/TC 201/SC 4 |
Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
|
60.60 | ISO/TC 201/SC 4 |
Gas analysis — Handling of calibration gases and gas mixtures — Guidelines
|
95.99 | ISO/TC 158 |
Gas analysis — Handling of calibration gases and gas mixtures — Guidelines
|
90.60 | ISO/TC 158 |
Surface chemical analysis — Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
|
95.99 | ISO/TC 201/SC 8 |
Surface chemical analysis — Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
|
90.93 | ISO/TC 201/SC 8 |
Surface chemical analysis — Depth profiling — Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
|
95.99 | ISO/TC 201/SC 4 |
Surface chemical analysis — Depth profiling — Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
|
60.60 | ISO/TC 201/SC 4 |
Surface chemical analysis — Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
|
90.20 | ISO/TC 201 |
Surface chemical analysis — Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy — Amendment 1
|
60.60 | ISO/TC 201 |
Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of boron in silicon
|
95.99 | ISO/TC 201/SC 6 |
Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of boron in silicon
|
90.93 | ISO/TC 201/SC 6 |
Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
|
95.99 | ISO/TC 201/SC 6 |
Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
|
60.60 | ISO/TC 201/SC 6 |
Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
|
60.60 | ISO/TC 201/SC 7 |
Surface chemical analysis — High-resolution Auger electron spectrometers — Calibration of energy scales for elemental and chemical-state analysis
|
90.93 | ISO/TC 201/SC 7 |
Surface chemical analysis — Secondary-ion mass spectrometry — Determination of relative sensitivity factors from ion-implanted reference materials
|
95.99 | ISO/TC 201/SC 6 |
Surface chemical analysis — Secondary-ion mass spectrometry — Determination of relative sensitivity factors from ion-implanted reference materials
|
60.60 | ISO/TC 201/SC 6 |
Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy
|
95.99 | ISO/TC 201/SC 1 |
Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy
|
95.99 | ISO/TC 201/SC 1 |
Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy
|
60.60 | ISO/TC 201/SC 1 |
Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy
|
95.99 | ISO/TC 201/SC 1 |
Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy
|
95.99 | ISO/TC 201/SC 1 |
Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy
|
60.60 | ISO/TC 201/SC 1 |
Surface chemical analysis — Vocabulary — Part 3: Terms used in optical interface analysis
|
60.60 | ISO/TC 201/SC 1 |
Surface chemical analysis — Vocabulary
|
95.99 | ISO/TC 201/SC 1 |
Surface chemical analysis — Vocabulary — Amendment 1
|
95.99 | ISO/TC 201/SC 1 |
Surface chemical analysis — Vocabulary — Amendment 2
|
95.99 | ISO/TC 201/SC 1 |
Surface chemical analysis — Guidelines for preparation and mounting of specimens for analysis
|
90.92 | ISO/TC 201/SC 2 |
Surface chemical analysis — Handling of specimens prior to analysis
|
95.99 | ISO/TC 201/SC 2 |
Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
|
60.60 | ISO/TC 201/SC 7 |
Surface chemical analysis — Surface characterization — Measurement of the lateral resolution of a confocal fluorescence microscope
|
90.93 | ISO/TC 201 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for determining backgrounds
|
90.92 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for determining backgrounds
|
30.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Auger electron spectroscopy — Derivation of chemical information
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Auger electron spectroscopy — Derivation of chemical information
|
60.60 | ISO/TC 201/SC 7 |
Surface chemical analysis — Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
|
90.93 | ISO/TC 201 |
Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Determination of lateral resolution
|
95.99 | ISO/TC 201/SC 2 |
Surface chemical analysis — Determination of lateral resolution and sharpness in beam based methods with a range from nanometres to micrometres
|
90.93 | ISO/TC 201/SC 2 |
Surface chemical analysis — Electron spectroscopies — Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
|
90.93 | ISO/TC 201/SC 7 |
Gas analysis — Purity analysis and the treatment of purity data
|
95.99 | ISO/TC 158 |
Gas analysis — Purity analysis and the treatment of purity data
|
90.60 | ISO/TC 158 |
Gas analysis — Sampling guidelines
|
60.60 | ISO/TC 158 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of methods used for charge control and charge correction
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of methods used for charge control and charge correction
|
60.60 | ISO/TC 201/SC 7 |
Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Determination of lateral resolution, analysis area, and sample area viewed by the analyser
|
95.99 | ISO/TC 201/SC 2 |
Surface chemical analysis — Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
|
60.60 | ISO/TC 201/SC 2 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Estimating and reporting detection limits for elements in homogeneous materials
|
90.60 | ISO/TC 201/SC 7 |
Surface chemical analysis — Characterization of functional glass substrates for biosensing applications
|
60.60 | ISO/TC 201 |
Surface chemical analysis — Electron spectroscopies — Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
|
90.93 | ISO/TC 201/SC 7 |
Surface chemical analysis — Total reflection X-ray fluorescence analysis of water
|
90.92 | ISO/TC 201/SC 10 |
Surface chemical analysis — Total reflection X-ray fluorescence analysis of water
|
40.60 | ISO/TC 201/SC 10 |
Surface chemical analysis — Secondary-ion mass spectrometry — Method for estimating depth resolution parameters with multiple delta-layer reference materials
|
90.20 | ISO/TC 201/SC 6 |
Surface chemical analysis — Secondary ion mass spectrometry — Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
|
90.92 | ISO/TC 201/SC 6 |
Surface chemical analysis — Sample handling, preparation and mounting — Part 1: Documenting and reporting the handling of specimens prior to analysis
|
60.60 | ISO/TC 201/SC 2 |
Surface chemical analysis — Sample handling, preparation and mounting — Part 2: Documenting and reporting the preparation and mounting of specimens for analysis
|
50.20 | ISO/TC 201/SC 2 |
Surface chemical analysis — Sample handling, preparation and mounting — Part 3: Biomaterials
|
60.60 | ISO/TC 201/SC 2 |
Surface chemical analysis — Guidelines to sample handling, preparation and mounting — Part 4: Reporting information related to the history, preparation, handling and mounting of nano-objects prior to surface analysis
|
90.93 | ISO/TC 201/SC 2 |
Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
|
95.99 | ISO/TC 201/SC 7 |
Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
|
90.60 | ISO/TC 201/SC 7 |
Chemical analysis of refractories containing alumina, zirconia and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents and dissolution
|
90.93 | ISO/TC 33 |
Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
|
90.93 | ISO/TC 33 |
Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES)
|
90.93 | ISO/TC 33 |
Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
|
60.60 | ISO/TC 201/SC 9 |
Surface chemical analysis — X-ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
|
90.93 | ISO/TC 201/SC 7 |
Surface chemical analysis — Information format for static secondary-ion mass spectrometry
|
90.93 | ISO/TC 201/SC 3 |
Surface chemical analysis — Depth profiling — Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer
|
90.93 | ISO/TC 201/SC 4 |
Surface chemical analysis — Secondary ion mass spectrometry — Method for determining yield volume in argon cluster sputter depth profiling of organic materials
|
90.60 | ISO/TC 201/SC 6 |
Surface chemical analysis — Near real-time information from the X-ray photoelectron spectroscopy survey scan — Rules for identification of, and correction for, surface contamination by carbon-containing compounds
|
60.60 | ISO/TC 201/SC 3 |
Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
|
60.60 | ISO/TC 201/SC 6 |
Surface chemical analysis — Measurement of lateral and axial resolutions of a Raman microscope
|
60.60 | ISO/TC 201 |
Surface chemical analysis — Depth profiling — Non-destructive depth profiling of nanoscale heavy metal oxide thin films on Si substrates with medium energy ion scattering
|
60.60 | ISO/TC 201/SC 4 |
Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
|
20.99 | ISO/TC 201/SC 9 |
Surface chemical analysis — Atomic force microscopy — Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
|
60.60 | ISO/TC 201/SC 9 |
Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth calibration for silicon using multiple delta-layer reference materials
|
90.93 | ISO/TC 201/SC 6 |
Surface chemical analysis — Secondary-ion mass spectrometry — Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
|
90.93 | ISO/TC 201/SC 6 |
Surface chemical analysis — Auger electron spectroscopy — Repeatability and constancy of intensity scale
|
90.93 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Repeatability and constancy of intensity scale
|
90.92 | ISO/TC 201/SC 7 |
Surface chemical analysis — X-ray photoelectron spectroscopy — Repeatability and constancy of intensity scale
|
40.00 | ISO/TC 201/SC 7 |
Surface chemical analysis — Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
|
60.60 | ISO/TC 201/SC 8 |
Surface chemical analysis — Determination of the minimum detectability of surface plasmon resonance device
|
60.60 | ISO/TC 201 |
Surface chemical analysis — Analysis of metal oxide films by glow-discharge optical-emission spectrometry
|
95.99 | ISO/TC 201/SC 8 |
Surface chemical analysis — Analysis of metal oxide films by glow-discharge optical-emission spectrometry
|
90.92 | ISO/TC 201/SC 8 |
Surface chemical analysis — Analysis of metal oxide films by glow discharge optical emission spectrometry
|
50.20 | ISO/TC 201/SC 8 |
Surface chemical analysis — Scanning-probe microscopy — Definition and calibration of the lateral resolution of a near-field optical microscope
|
90.93 | ISO/TC 201/SC 9 |
Surface chemical analysis — Data transfer format for scanning-probe microscopy
|
90.93 | ISO/TC 201/SC 3 |
Gas mixtures — Gravimetric preparation — Mastering correlations in composition
|
90.60 | ISO/TC 158 |
Gas mixtures — Gravimetric preparation — Mastering correlations in composition — Technical Corrigendum 1
|
60.60 | ISO/TC 158 |
Surface chemical analysis — Auger electron spectroscopy — Reporting of methods used for charge control and charge correction
|
90.93 | ISO/TC 201/SC 7 |
No matching records found. Please try changing the filter settings.