Reference number
ISO 10816-4:2009
© ISO 2024
ISO 10816-4:2009
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings
Edition 2
2009-10
Retirada
Retirada (Edición 2, 2009)

Resumen

ISO 10816-4:2009 establishes specific provisions for evaluating the severity of in-situ, broad-band vibration measured radial (i.e. transverse) to the shaft axis on all main bearing housings or pedestals and in the axial direction on thrust bearings. These are in terms of:

- vibration under normal steady-state operating conditions;

- vibration during other (non-steady-state) conditions when transient changes are taking place, including run up or run down, initial loading and load changes;

- changes in vibration which can occur during normal steady-state operation.

ISO 10816-4:2009 is applicable to heavy-duty gas turbine sets used in electrical and mechanical drive applications, with fluid-film bearings, outputs greater than 3 MW and an operating speed range under load between 3 000 r/min and 30 000 r/min.

Informaciones generales

  • Estado
     : Retirada
    Fecha de publicación
     : 2009-10
    Etapa
    : Retirada de la Norma Internacional [95.99]
  • Edición
     : 2
    Número de páginas
     : 16
  • Comité Técnico :
    ISO/TC 108/SC 2
    ICS :
    17.160  27.040 
  • RSS actualizaciones

Ciclo de vida

¿Tiene alguna duda?

Consulte nuestras Ayuda y asistencia

  2. Tienda
  3. Standards catalogue
  4. ICS
  5. 17
  6. 17.160
  7. ISO 10816-4:2009