Reference number
ISO/IEC 23290:2004
International Standard
ISO/IEC 23290:2004
Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network (PISN) — Mapping functions for the tunnelling of QSIG through H.323 networks
Edition 2
2004-10
Preview
ISO/IEC 23290:2004
40165
Indisponible en français
Publiée (Edition 2, 2004)
Cette publication a été révisée et confirmée pour la dernière fois en 2015. Cette édition reste donc d’actualité.

ISO/IEC 23290:2004

ISO/IEC 23290:2004
40165
Langue
Format
CHF 129
Convertir les francs suisses (CHF) dans une autre devise
La version électronique de cette Norme internationale peut être téléchargée à partir du site Web du Groupe de travail ISO/CEI sur les technologies de l'information (ITTF)

Résumé

ISO/IEC 23290:2004 specifies functions for using an H.323 packet network in order to interconnect two Private Integrated services Network eXchanges (PINXs) forming part of a Private Integrated Services Network (PISN). Interconnection is achieved by carrying the inter-PINX signalling protocol over the H.323 call signalling channel, making use of the protocol tunnelling facilities of H.323, and inter-PINX user information (e.g. voice) over logical channels established through H.323. Each logical channel usually represents a unidirectional media stream conveyed by means of the Real-time Transport Protocol (RTP). The inter-PINX signalling protocol is assumed to be QSIG, as specified in ISO/IEC 11572, ISO/IEC 11582 and other International Standards.

ISO/IEC 23290:2004 provides for an on-demand type of interconnection, where a separate H.323 call is established at the start of each PISN call and cleared down at the end of that call. A semi-permanent scenario where a single H.323 call with an indefinite lifetime carries QSIG on behalf of many PISN calls is described as an additional option.

In the scenarios covered in ISO/IEC 23290:2004, the PINXs participating in a call are not necessarily aware of the H.323 network providing the interconnection, and the features available are those of the QSIG network. This is different from a scenario where true interworking between QSIG and H.323 (i.e. QSIG-H.323-QSIG) is used to connect two PISNs or two parts of the same PISN. In this latter case, all networks participate in a call on equal terms, and features are limited to those available in all networks and supported by the gateways. This latter scenario is outside the scope of this document.

ISO/IEC 23290:2004 is applicable to PINXs that can be interconnected to form a PISN using QSIG as the inter-PINX signalling protocol.

Informations générales

  •  : Publiée
     : 2004-10
    : Clôture de l'examen [90.60]
  •  : 2
  • ISO/IEC JTC 1/SC 6
    33.040.35 
  • RSS mises à jour

Cycle de vie

Vous avez une question?

Consulter notre Aide et assistance