Reference number
ISO 18312-1:2012
International Standard
ISO 18312-1:2012
Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 1: Direct method
Edition 1
2012-01
Preview
ISO 18312-1:2012
43714
Indisponible en français
Publiée (Edition 1, 2012)
Cette publication a été révisée et confirmée pour la dernière fois en 2023. Cette édition reste donc d’actualité.

ISO 18312-1:2012

ISO 18312-1:2012
43714
Langue
Format
CHF 96
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This part of ISO 18312 specifies a method for evaluating the vibration power emitted by machines or pipelines,

referred to hereinafter as machines, under operational conditions on to supporting structures to which the

machines are directly connected via bolted joints. This part of ISO 18312 specifies the method for evaluating

the vibration power components emitted in the six degrees of freedom of a Cartesian coordinate system at

each joint, i.e. three translations and three rotations. The vibration power is determined by processing the

signals from force and velocity (or acceleration) transducers mounted on to the bolted joints under operational

conditions of interest. This method is applicable for machines under the assumption that their vibration can be

characterized by a stationary random process.

The components of emitted vibration power in the frequency domain are obtained by computing the

cross‑spectrum of the force and velocity measurement pairs with a given narrow band width at each bolted joint.

This direct method assumes that the supporting structures are adequately rigid and, hence, it is not applicable

to cases where the foundation or supporting structures are resilient, which will potentially go into a state of

resonance within the frequency range of interest. Practical frequency limits of the method are specified in this

part of ISO 18312.

This part of ISO 18312 can be used in operational conditions for:

a) specification of vibration power emission of machines at the (bolted) joints;

b) identification of vibration power severity;

c) resolving diagnostics issues;

d) planning vibration control measures.

Informations générales

  •  : Publiée
     : 2012-01
    : Norme internationale confirmée [90.93]
  •  : 1
  • ISO/TC 108
    17.160 
  • RSS mises à jour

Cycle de vie

Vous avez une question?

Consulter notre Aide et assistance