Technical Specification
ISO/TS 10303-1828:2024
Industrial automation systems and integration — Product data representation and exchange — Part 1828: Application module: Wiring harness assembly design
Reference number
ISO/TS 10303-1828:2024
Edition 4
2024-09
Technical Specification
Preview
ISO/TS 10303-1828:2024
89794
Indisponible en français
Publiée (Edition 4, 2024)

Résumé

ISO/TS 10303-1828 specifies the application module for Wiring harness assembly design.

The following are within the scope of ISO/TS 10303-1828:

  • electrical definition of a wiring harness;
  • wire-list for an wiring harness assembly, consisting of:
    • wires and cables;
    • terminal lug;
    • terminal block;
    • electrically non conductive through termination;
    • wire cap;
    • single and multi pin connector contact;
    • splice definitions within the harness assembly;
    • electrical shielding definition in the assembly.
  • component-list for an wiring harness assembly, consisting of:
    • connector and associated material;
    • terminal lug;
    • terminal block;
    • electrically non conductive through termination;
    • wire cap;
    • single and multi pin connector contact;
    • splice definitions within the harness assembly;
    • electrical shielding definition in the assembly;
    • tape marking.
  • modifications made to the cables and wires to be used in the harness;
  • assembly joints, each of which specify the mechanical connection between two terminals;
  • requirement allocation from the physical connectivity definition to the implementing item in the wire list;
  • assembly_joint that reference an external item;
  • segment topology of an electrical harness;
  • cross section structure of harness segments;
  • marking of harness components and topology segments;
  • protection of harness segments including:
    • grommet;
    • retention clamps;
    • sleeving;
    • overall shielding for one or more harness segments.
  • items within the scope of application module Wire and cable design connectivity, ISO/TS 10303-1845;
  • items within the scope of application module Extruded structure cross section, ISO/TS 10303-1827;
  • items within the scope of application module Edge based topological representation with length, ISO/TS 10303-1830.

Informations générales

  •  : Publiée
     : 2024-09
    : Norme internationale publiée [60.60]
  •  : 4
  • ISO/TC 184/SC 4
    35.240.50 
  • RSS mises à jour

Ajouter au panier cette norme

La collection SMRL est la bibliothèque de ressources et modules STEP, la norme pour l'échange de données sur les modèles de produits. Elle s'adresse à tous ceux qui envisagent d'adopter les protocoles d'application modulaires et modules d'application ISO 10303, les parties de cette norme relatives aux …

Vous avez une question?

Consulter notre Aide et assistance