Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 164/SC 1 Секретариата | Этап | ICS |
---|---|---|
Tensile tests for discontinuously reinforced metal matrix composites at ambient temperatures
|
95.99 | |
Code of practice for creep/fatigue testing of cracked components
|
90.92 | |
Steel — Tensile testing
|
95.99 | |
Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
|
95.99 | |
Steel — Tensile testing of wire
|
95.99 | |
Load calibration of testing machines for tensile testing of steel
|
95.99 | |
Tensile testing of light metals and their alloys
|
95.99 | |
Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
|
95.99 | |
Metallic materials — Uninterrupted uniaxial creep testing in tension — Method of test
|
95.99 | |
Non-interrupted creep testing of steel at elevated temperatures
|
95.99 | |
Metallic materials — Uniaxial creep testing in tension — Method of test
|
95.99 | |
Metallic materials — Uniaxial creep testing in tension — Method of test
|
95.99 | |
Metallic materials — Uniaxial creep testing in tension — Method of test
|
60.60 | |
Creep stress rupture testing of steel at elevated temperatures
|
95.99 | |
Steel — Tensile testing of tubes
|
95.99 | |
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
95.99 | |
Calibration of elastic proving devices
|
95.99 | |
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
95.99 | |
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
95.99 | |
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
90.93 | |
Tensile testing of copper and copper alloys
|
95.99 | |
Tensile testing of copper and copper alloy tubes of circular section
|
95.99 | |
Tensile testing of copper and copper alloy wire
|
95.99 | |
Metallic materials — Tensile testing at elevated temperature
|
95.99 | |
Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
|
95.99 | |
Metallic materials — Tensile testing at elevated temperature
|
95.99 | |
Tensile testing of light metal and light metal alloy tubes
|
95.99 | |
Tensile test for light metal and light metal alloy wires
|
95.99 | |
Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test
|
95.99 | |
Tensile testing systems — Determination of K-value
|
95.99 | |
Metallic materials — High temperature creep/fatigue crack growth testing method
|
20.60 |
|
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
|
95.99 | |
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
|
95.99 | |
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
|
60.60 | |
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
|
95.99 | |
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
|
90.92 | |
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
|
30.60 |
|
Metallic materials — Tensile testing — Part 3: Method of test at low temperature
|
90.93 | |
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
|
90.93 | |
Metallic materials — Tensile testing — Part 5: Specification for testing miniaturised test pieces
|
60.00 | |
Metallic materials — Tensile testing — Part 6: Tensile test on foils and strips of metals with a nominal thickness less than 0,200 mm by using computer-controlled testing machines
|
20.00 |
|
Metallic materials — Tensile testing
|
95.99 | |
Metallic materials — Tensile testing at ambient temperature
|
95.99 | |
Metallic materials — Tensile testing — Method for evaluating the susceptibility of materials to the effects of high-pressure gas within hollow test pieces
|
60.60 | |
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tensile testing machines
|
95.99 | |
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
|
95.99 | |
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
|
95.99 | |
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system — Technical Corrigendum 1
|
95.99 | |
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
|
95.99 | |
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
|
90.93 | |
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied load
|
95.99 | |
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force
|
90.93 | |
Metallic materials — Verification of extensometers used in uniaxial testing
|
95.99 | |
Metallic materials — Calibration of extensometers used in uniaxial testing
|
95.99 | |
Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1
|
95.99 | |
Metallic materials — Calibration of extensometer systems used in uniaxial testing
|
90.93 | |
Metallic materials — Calibration of extensometer systems used in uniaxial testing — Technical Corrigendum 1
|
60.60 | |
Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
|
60.60 | |
Mechanical tests on metallic materials - Evaluation of uncertainties in creep testing
|
20.00 |
|
Metallic materials — Tensile testing at low temperature
|
95.99 | |
Metallic materials — Tensile testing in liquid helium
|
95.99 | |
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
|
95.99 | |
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
|
90.92 | |
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
|
40.20 | |
Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
|
90.93 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.