ISO/IEC JTC 1
|
Information technology |
ISO/IEC JTC 1/SC 7
|
Software and systems engineering |
ISO/IEC JTC 1/SC 27
|
Information security, cybersecurity and privacy protection |
ISO/IEC JTC 1/SC 29
|
Coding of audio, picture, multimedia and hypermedia information |
ISO/IEC JTC 1/SC 36
|
Information technology for learning, education and training |
ISO/IEC JTC 1/SC 39
|
Sustainability, IT and data centres |
ISO/IEC JTC 1/SC 40
|
IT service management and IT governance |
ISO/TC 2
|
Fasteners |
ISO/TC 5
|
Ferrous metal pipes and metallic fittings |
ISO/TC 6
|
Paper, board and pulps |
ISO/TC 6/SC 2
|
Test methods and quality specifications for paper and board |
ISO/TC 8
|
Ships and marine technology |
ISO/TC 8/SC 8
|
Ship design |
ISO/TC 8/SC 13
|
Marine technology |
ISO/TC 17
|
Steel |
ISO/TC 17/SC 1
|
Methods of determination of chemical composition |
ISO/TC 17/SC 3
|
Steels for structural purposes |
ISO/TC 17/SC 4
|
Heat treatable and alloy steels |
ISO/TC 17/SC 7
|
Methods of testing (other than mechanical tests and chemical analysis) |
ISO/TC 17/SC 9
|
Tinplate and blackplate |
ISO/TC 17/SC 10
|
Steel for pressure purposes |
ISO/TC 17/SC 11
|
Steel castings |
ISO/TC 17/SC 12
|
Continuous mill flat rolled products |
ISO/TC 17/SC 15
|
Railway rails, rails fasteners, wheels and wheelsets |
ISO/TC 17/SC 16
|
Steels for the reinforcement and prestressing of concrete |
ISO/TC 17/SC 17
|
Steel wire rod and wire products |
ISO/TC 17/SC 19
|
Technical delivery conditions for steel tubes for pressure purposes |
ISO/TC 17/SC 20
|
General technical delivery conditions, inspection documents and sampling for mechanical testing |
ISO/TC 17/SC 21
|
Environment related to climate change in the iron and steel industry |
ISO/TC 20
|
Aircraft and space vehicles |
ISO/TC 20/SC 8
|
Aerospace terminology |
ISO/TC 20/SC 16
|
Uncrewed Aircraft Systems |
ISO/TC 21
|
Equipment for fire protection and fire fighting |
ISO/TC 21/SC 2
|
Manually transportable fire extinguishers |
ISO/TC 21/SC 3
|
Fire detection and alarm systems |
ISO/TC 22
|
Road vehicles |
ISO/TC 22/SC 32
|
Electrical and electronic components and general system aspects |
ISO/TC 23
|
Tractors and machinery for agriculture and forestry |
ISO/TC 23/SC 2
|
Common tests |
ISO/TC 24
|
Particle characterization including sieving |
ISO/TC 25
|
Cast irons and pig irons |
ISO/TC 26
|
Copper and copper alloys |
ISO/TC 27
|
Coal and coke |
ISO/TC 27/SC 1
|
Coal preparation: Terminology and performance |
ISO/TC 27/SC 3
|
Coke |
ISO/TC 27/SC 4
|
Sampling |
ISO/TC 27/SC 5
|
Methods of analysis |
ISO/TC 28
|
Petroleum and related products, fuels and lubricants from natural or synthetic sources |
ISO/TC 28/SC 2
|
Measurement of petroleum and related products |
ISO/TC 28/SC 4
|
Classifications and specifications |
ISO/TC 28/SC 5
|
Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels |
ISO/TC 28/SC 7
|
Liquid Biofuels |
ISO/TC 30/SC 7
|
Volume methods including water meters |
ISO/TC 34
|
Food products |
ISO/TC 34/SC 2
|
Oleaginous seeds and fruits and oilseed meals |
ISO/TC 34/SC 3
|
Fruits and vegetables and their derived products |
ISO/TC 34/SC 4
|
Cereals and pulses |
ISO/TC 34/SC 5
|
Milk and milk products |
ISO/TC 34/SC 6
|
Meat, poultry, fish, eggs and their products |
ISO/TC 34/SC 7
|
Spices, culinary herbs and condiments |
ISO/TC 34/SC 8
|
Tea |
ISO/TC 34/SC 9
|
Microbiology |
ISO/TC 34/SC 10
|
Animal feeding stuffs |
ISO/TC 34/SC 11
|
Animal and vegetable fats and oils |
ISO/TC 34/SC 12
|
Sensory analysis |
ISO/TC 34/SC 15
|
Coffee |
ISO/TC 34/SC 16
|
Horizontal methods for molecular biomarker analysis |
ISO/TC 34/SC 17
|
Management systems for food safety |
ISO/TC 34/SC 18
|
Cocoa |
ISO/TC 34/SC 19
|
Bee products |
ISO/TC 34/SC 20
|
Food loss and waste |
ISO/TC 35
|
Paints and varnishes |
ISO/TC 35/SC 9
|
General test methods for paints and varnishes |
ISO/TC 35/SC 12
|
Preparation of steel substrates before application of paints and related products |
ISO/TC 35/SC 14
|
Protective paint systems for steel structures |
ISO/TC 35/SC 15
|
Protective coatings: concrete surface preparation and coating application |
ISO/TC 37
|
Language and terminology |
ISO/TC 37/SC 1
|
Principles and methods |
ISO/TC 37/SC 2
|
Terminology workflow and language coding |
ISO/TC 37/SC 3
|
Management of terminology resources |
ISO/TC 37/SC 4
|
Language resource management |
ISO/TC 37/SC 5
|
Translation, interpreting and related technology |
ISO/TC 38
|
Textiles |
ISO/TC 38/SC 1
|
Tests for coloured textiles and colorants |
ISO/TC 38/SC 2
|
Cleansing, finishing and water resistance tests |
ISO/TC 38/SC 20
|
Fabric descriptions |
ISO/TC 38/SC 23
|
Fibres and yarns |
ISO/TC 38/SC 24
|
Conditioning atmospheres and physical tests for textile fabrics |
ISO/TC 39
|
Machine tools |
ISO/TC 39/SC 2
|
Test conditions for metal cutting machine tools |
ISO/TC 39/SC 6
|
Noise of machine tools |
ISO/TC 39/SC 8
|
Work holding spindles and chucks |
ISO/TC 39/SC 10
|
Safety |
ISO/TC 43
|
Acoustics |
ISO/TC 43/SC 1
|
Noise |
ISO/TC 43/SC 2
|
Building acoustics |
ISO/TC 44
|
Welding and allied processes |
ISO/TC 44/SC 3
|
Welding consumables |
ISO/TC 44/SC 5
|
Testing and inspection of welds |
ISO/TC 44/SC 9
|
Health and safety |
ISO/TC 44/SC 10
|
Quality management in the field of welding |
ISO/TC 44/SC 11
|
Qualification requirements for welding and allied processes personnel |
ISO/TC 44/SC 13
|
Brazing materials and processes |
ISO/TC 45
|
Rubber and rubber products |
ISO/TC 45/SC 2
|
Testing and analysis |
ISO/TC 45/SC 3
|
Raw materials (including latex) for use in the rubber industry |
ISO/TC 45/SC 4
|
Products (other than hoses) |
ISO/TC 46
|
Information and documentation |
ISO/TC 46/SC 4
|
Technical interoperability |
ISO/TC 46/SC 8
|
Quality - Statistics and performance evaluation |
ISO/TC 46/SC 9
|
Identification and description |
ISO/TC 46/SC 10
|
Requirements for document storage and conditions for preservation |
ISO/TC 46/SC 11
|
Archives/records management |
ISO/TC 47
|
Chemistry |
ISO/TC 48
|
Laboratory equipment |
ISO/TC 54
|
Essential oils |
ISO/TC 58
|
Gas cylinders |
ISO/TC 58/SC 2
|
Cylinder fittings |
ISO/TC 58/SC 3
|
Cylinder design |
ISO/TC 58/SC 4
|
Operational requirements for gas cylinders |
ISO/TC 59
|
Buildings and civil engineering works |
ISO/TC 61
|
Plastics |
ISO/TC 61/SC 1
|
Terminology |
ISO/TC 61/SC 2
|
Mechanical behavior |
ISO/TC 61/SC 4
|
Burning behaviour |
ISO/TC 61/SC 5
|
Physical-chemical properties |
ISO/TC 61/SC 6
|
Ageing, chemical and environmental resistance |
ISO/TC 61/SC 9
|
Thermoplastic materials |
ISO/TC 61/SC 10
|
Cellular plastics |
ISO/TC 61/SC 11
|
Products |
ISO/TC 61/SC 12
|
Thermosetting materials |
ISO/TC 61/SC 14
|
Environmental aspects |
ISO/TC 67
|
Oil and gas industries including lower carbon energy |
ISO/TC 67/SC 2
|
Pipeline transportation systems |
ISO/TC 67/SC 3
|
Drilling and completion fluids, well cements and treatment fluids |
ISO/TC 67/SC 4
|
Drilling, production and injection equipment |
ISO/TC 67/SC 5
|
Casing, tubing and drill pipe |
ISO/TC 67/SC 6
|
Process equipment, piping, systems, and related safety |
ISO/TC 67/SC 7
|
Offshore structures |
ISO/TC 67/SC 10
|
Enhanced oil recovery |
ISO/TC 69
|
Applications of statistical methods |
ISO/TC 69/SC 4
|
Applications of statistical methods in product and process management |
ISO/TC 70
|
Internal combustion engines |
ISO/TC 70/SC 7
|
Tests for lubricating oil filters |
ISO/TC 70/SC 8
|
Exhaust gas emission measurement |
ISO/TC 71
|
Concrete, reinforced concrete and pre-stressed concrete |
ISO/TC 71/SC 1
|
Test methods for concrete |
ISO/TC 71/SC 3
|
Concrete production and execution of concrete structures |
ISO/TC 74
|
Cement and lime |
ISO/TC 76
|
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use |
ISO/TC 77
|
Products in fibre reinforced cement |
ISO/TC 79
|
Light metals and their alloys |
ISO/TC 79/SC 1
|
Methods of chemical and spectro-chemical analysis on Aluminium & Aluminium alloys |
ISO/TC 79/SC 6
|
Wrought aluminium and aluminium alloys |
ISO/TC 79/SC 7
|
Aluminium and cast aluminium alloys |
ISO/TC 81
|
Common names for pesticides and other agrochemicals |
ISO/TC 82
|
Mining |
ISO/TC 82/SC 7
|
Sustainable mining and mine closure |
ISO/TC 82/SC 8
|
Advanced automated mining systems |
ISO/TC 83
|
Sports and other recreational facilities and equipment |
ISO/TC 83/SC 4
|
Snowsports equipment |
ISO/TC 83/SC 6
|
Martial arts |
ISO/TC 84
|
Devices for administration of medicinal products and catheters |
ISO/TC 85
|
Nuclear energy, nuclear technologies, and radiological protection |
ISO/TC 85/SC 2
|
Radiological protection |
ISO/TC 85/SC 5
|
Nuclear installations, processes and technologies |
ISO/TC 85/SC 6
|
Reactor technology |
ISO/TC 86
|
Refrigeration and air-conditioning |
ISO/TC 86/SC 7
|
Testing and rating of commercial refrigerated display cabinets |
ISO/TC 89
|
Wood-based panels |
ISO/TC 89/SC 2
|
Particle boards |
ISO/TC 89/SC 3
|
Plywood |
ISO/TC 91
|
Surface active agents |
ISO/TC 92
|
Fire safety |
ISO/TC 92/SC 1
|
Fire initiation and growth |
ISO/TC 92/SC 4
|
Fire safety engineering |
ISO/TC 93
|
Starch (including derivatives and by-products) |
ISO/TC 94
|
Personal safety -- Personal protective equipment |
ISO/TC 94/SC 3
|
Foot protection |
ISO/TC 94/SC 13
|
Protective clothing |
ISO/TC 96
|
Cranes |
ISO/TC 102
|
Iron ore and direct reduced iron |
ISO/TC 102/SC 2
|
Chemical analysis |
ISO/TC 102/SC 3
|
Physical testing |
ISO/TC 104
|
Freight containers |
ISO/TC 105
|
Steel wire ropes |
ISO/TC 106
|
Dentistry |
ISO/TC 106/SC 1
|
Filling and restorative materials |
ISO/TC 106/SC 3
|
Terminology |
ISO/TC 106/SC 4
|
Dental instruments |
ISO/TC 106/SC 6
|
Dental equipment |
ISO/TC 106/SC 7
|
Oral care products |
ISO/TC 106/SC 8
|
Dental implants |
ISO/TC 107
|
Metallic and other inorganic coatings |
ISO/TC 107/SC 3
|
Electrodeposited coatings and related finishes |
ISO/TC 107/SC 4
|
Hot dip coatings (galvanized, etc.) |
ISO/TC 107/SC 7
|
Corrosion tests |
ISO/TC 107/SC 8
|
Chemical conversion coatings |
ISO/TC 110
|
Industrial trucks |
ISO/TC 112
|
Vacuum technology |
ISO/TC 115
|
Pumps |
ISO/TC 115/SC 1
|
Dimensions and technical specifications of pumps |
ISO/TC 115/SC 2
|
Methods of measurement and testing |
ISO/TC 115/SC 3
|
Installation and special application |
ISO/TC 117
|
Fans |
ISO/TC 119
|
Powder metallurgy |
ISO/TC 120
|
Leather |
ISO/TC 120/SC 1
|
Raw hides and skins, including pickled pelts |
ISO/TC 120/SC 2
|
Tanned leather |
ISO/TC 120/SC 3
|
Leather products |
ISO/TC 121
|
Anaesthetic and respiratory equipment |
ISO/TC 121/SC 6
|
Medical gas supply systems |
ISO/TC 122
|
Packaging |
ISO/TC 122/SC 3
|
Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122) |
ISO/TC 127
|
Earth-moving machinery |
ISO/TC 127/SC 2
|
Safety, ergonomics and general requirements |
ISO/TC 127/SC 3
|
Machine characteristics, electrical and electronic systems, operation and maintenance |
ISO/TC 133
|
Clothing sizing systems - size designation, size measurement methods and digital fittings |
ISO/TC 134
|
Fertilizers, soil conditioners and beneficial substances |
ISO/TC 135
|
Non-destructive testing |
ISO/TC 135/SC 2
|
Surface methods |
ISO/TC 135/SC 3
|
Ultrasonic testing |
ISO/TC 135/SC 4
|
Eddy current testing |
ISO/TC 135/SC 5
|
Radiographic testing |
ISO/TC 135/SC 6
|
Leak testing |
ISO/TC 135/SC 7
|
Personnel qualification |
ISO/TC 135/SC 8
|
Thermographic testing |
ISO/TC 136
|
Furniture |
ISO/TC 137
|
Footwear sizing designations and marking systems |
ISO/TC 138
|
Plastics pipes, fittings and valves for the transport of fluids |
ISO/TC 138/SC 1
|
Plastics pipes and fittings for soil, waste and drainage (including land drainage) |
ISO/TC 138/SC 2
|
Plastics pipes and fittings for water supplies |
ISO/TC 138/SC 3
|
Plastics pipes and fittings for industrial applications |
ISO/TC 138/SC 4
|
Plastics pipes and fittings for the supply of gaseous fuels |
ISO/TC 138/SC 5
|
General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications |
ISO/TC 138/SC 6
|
Reinforced plastics pipes and fittings for all applications |
ISO/TC 138/SC 7
|
Valves and auxiliary equipment of plastics materials |
ISO/TC 138/SC 8
|
Rehabilitation of pipeline systems |
ISO/TC 145
|
Graphical symbols |
ISO/TC 146/SC 3
|
Ambient atmospheres |
ISO/TC 147
|
Water quality |
ISO/TC 147/SC 1
|
Terminology |
ISO/TC 147/SC 2
|
Physical, chemical and biochemical methods |
ISO/TC 147/SC 3
|
Radioactivity measurements |
ISO/TC 147/SC 4
|
Microbiological methods |
ISO/TC 147/SC 5
|
Biological methods |
ISO/TC 147/SC 6
|
Sampling (general methods) |
ISO/TC 149
|
Cycles |
ISO/TC 150
|
Implants for surgery |
ISO/TC 150/SC 1
|
Materials |
ISO/TC 150/SC 6
|
Active implants |
ISO/TC 153
|
Valves |
ISO/TC 154
|
Processes, data elements and documents in commerce, industry and administration |
ISO/TC 156
|
Corrosion of metals and alloys |
ISO/TC 159
|
Ergonomics |
ISO/TC 160
|
Glass in building |
ISO/TC 161
|
Controls and protective devices for gaseous and liquid fuels |
ISO/TC 163
|
Thermal performance and energy use in the built environment |
ISO/TC 163/SC 1
|
Test and measurement methods |
ISO/TC 163/SC 2
|
Calculation methods |
ISO/TC 163/SC 3
|
Thermal insulation products, components and systems |
ISO/TC 164
|
Mechanical testing of metals |
ISO/TC 164/SC 2
|
Ductility testing |
ISO/TC 164/SC 3
|
Hardness testing |
ISO/TC 165
|
Timber structures |
ISO/TC 166
|
Ceramic ware, glassware and glass ceramic ware in contact with food |
ISO/TC 167
|
Steel and aluminium structures |
ISO/TC 171
|
Document management applications |
ISO/TC 171/SC 1
|
Quality, preservation and integrity of information |
ISO/TC 171/SC 2
|
Document file formats, EDMS systems and authenticity of information |
ISO/TC 172
|
Optics and photonics |
ISO/TC 172/SC 9
|
Laser and electro-optical systems |
ISO/TC 173
|
Assistive products |
ISO/TC 174
|
Jewellery and precious metals |
ISO/TC 176
|
Quality management and quality assurance |
ISO/TC 176/SC 1
|
Concepts and terminology |
ISO/TC 176/SC 2
|
Quality systems |
ISO/TC 176/SC 3
|
Supporting technologies |
ISO/TC 180
|
Solar energy |
ISO/TC 181
|
Safety of toys |
ISO/TC 182
|
Geotechnics |
ISO/TC 188
|
Small craft |
ISO/TC 189
|
Ceramic tile |
ISO/TC 190
|
Soil quality |
ISO/TC 190/SC 3
|
Chemical and physical characterization |
ISO/TC 192
|
Gas turbines |
ISO/TC 194
|
Biological and clinical evaluation of medical devices |
ISO/TC 197
|
Hydrogen technologies |
ISO/TC 201
|
Surface chemical analysis |
ISO/TC 201/SC 9
|
Scanning probe microscopy |
ISO/TC 201/SC 10
|
X-ray Reflectometry (XRR) and X-ray Fluorescence (XRF) Analysis |
ISO/TC 202
|
Microbeam analysis |
ISO/TC 204
|
Intelligent transport systems |
ISO/TC 207
|
Environmental management |
ISO/TC 207/SC 7
|
Greenhouse gas and climate change management and related activities |
ISO/TC 209
|
Cleanrooms and associated controlled environments |
ISO/TC 210
|
Quality management and corresponding general aspects for products with a health purpose including medical devices |
ISO/TC 211
|
Geographic information/Geomatics |
ISO/TC 212
|
Medical laboratories and in vitro diagnostic systems |
ISO/TC 213
|
Dimensional and geometrical product specifications and verification |
ISO/TC 214
|
Elevating work platforms |
ISO/TC 215
|
Health informatics |
ISO/TC 216
|
Footwear |
ISO/TC 217
|
Cosmetics |
ISO/TC 219
|
Floor coverings |
ISO/TC 220
|
Cryogenic vessels |
ISO/TC 221
|
Geosynthetics |
ISO/TC 225
|
Market, opinion and social research |
ISO/TC 226
|
Materials for the production of primary aluminium |
ISO/TC 228
|
Tourism and related services |
ISO/TC 229
|
Nanotechnologies |
ISO/TC 234
|
Fisheries and aquaculture |
ISO/TC 241
|
Road traffic safety management systems |
ISO/TC 249
|
Traditional Chinese medicine |
ISO/TC 254
|
Safety of amusement rides and amusement devices |
ISO/TC 255
|
Biogas |
ISO/TC 256
|
Pigments, dyestuffs and extenders |
ISO/TC 260
|
Human resource management |
ISO/TC 262
|
Risk management |
ISO/TC 268
|
Sustainable cities and communities |
ISO/TC 268/SC 1
|
Smart community infrastructures |
ISO/TC 268/SC 2
|
Sustainable cities and communities - Sustainable mobility and transportation |
ISO/TC 270
|
Plastics and rubber machines |
ISO/TC 274
|
Light and lighting |
ISO/TC 276
|
Biotechnology |
ISO/TC 282
|
Water reuse |
ISO/TC 282/SC 1
|
Treated wastewater reuse for irrigation |
ISO/TC 282/SC 2
|
Water reuse in urban areas |
ISO/TC 282/SC 3
|
Risk and performance evaluation of water reuse systems |
ISO/TC 282/SC 4
|
Industrial water reuse |
ISO/TC 283
|
Occupational health and safety management |
ISO/TC 289
|
Brand evaluation |
ISO/TC 292
|
Security and resilience |
ISO/TC 292/SC 1
|
Emergency management |
ISO/TC 293
|
Feed machinery |
ISO/TC 297
|
Waste collection and transportation management |
ISO/TC 301
|
Energy management and energy savings |
ISO/PC 302
|
Guidelines for auditing management systems |
ISO/TC 304
|
Healthcare organization management |
ISO/TC 309
|
Governance of organizations |
ISO/TC 314
|
Ageing societies |
ISO/TC 319
|
Karst |
ISO/TC 323
|
Circular economy |
ISO/TC 327
|
Natural stones |
ISO/TC 328
|
Engineered stones |
ISO/PC 329
|
Consumer incident investigation guideline |
ISO/TC 334
|
Reference materials |
ISO/TC 338
|
Menstrual products |
ISO/TC 339
|
Small hydropower plants (SHP plants) |