Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 23/SC 2 Секретариата Этап ICS
Agricultural tractors — Test procedures — Part 1: Power tests
95.99
Agricultural tractors — Test procedures — Part 1: Power tests for power take-off
95.99
Agricultural tractors — Test procedures — Part 1: Power tests for power take-off
90.93
Agricultural tractors — Test procedures — Part 2: Hydraulic power and lifting capacity
95.99
Agricultural tractors — Test procedures — Part 2: Rear three-point linkage lifting capacity
95.99
Agricultural tractors — Test procedures — Part 2: Rear three-point linkage lifting capacity
90.93
Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters
95.99
Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters
95.99
Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters
90.93
Agricultural tractors — Test procedures — Part 4: Measurement of exhaust smoke
95.99
Agricultural tractors — Test procedures — Part 4: Measurement of exhaust smoke
90.93
Agricultural tractors — Test procedures — Part 5: Partial power PTO — Non-mechanically transmitted power
95.99
Agricultural tractors — Test procedures — Part 6: Centre of gravity
95.99
Agricultural tractors — Test procedures — Part 6: Centre of gravity — Amendment 1
95.99
Agricultural tractors — Test procedures — Part 6: Centre of gravity
90.93
Agricultural tractors — Test procedures — Part 7: Axle power determination
90.93
Agricultural tractors — Test procedures — Part 8: Engine air cleaner
90.93
Agricultural tractors — Test procedures — Part 9: Power tests for drawbar
95.99
Agricultural tractors — Test procedures — Part 9: Power tests for drawbar — Amendment 1
95.99
Agricultural tractors — Test procedures — Part 9: Power tests for drawbar
90.93
Agricultural tractors — Test procedures — Part 10: Hydraulic power at tractor/implement interface
95.99
Agricultural tractors — Test procedures — Part 10: Hydraulic power at tractor/implement interface
90.60
Agricultural tractors — Test procedures — Part 11: Steering capability of wheeled tractors
90.93
Agricultural tractors — Test procedures — Part 12: Low temperature starting
90.20
Agricultural tractors — Test procedures — Part 13: Vocabulary and specimen test report
90.93
Withdrawal of ISO/R 789-1968
95.99
Agricultural tractors and machines — Engine test code (bench test) — Net power
95.99
Agricultural tractors and machines — Engine test code (bench test) — Net power — Amendment 1
95.99
Agricultural tractors and machines — Engine test code (bench test) — Net power
95.99
Agricultural tractors and machines — Engine test code — Net power
95.99
Agricultural tractors and self-propelled sprayers — Protection of the Operator (driver) against hazardous substances — Part 1: Terminology and overview
20.00
Agricultural tractors and self-propelled sprayers — Protection of the Operator (driver) against hazardous substances — Part 2: Design concepts
20.00
Agricultural tractors and self-propelled sprayers — Protection of the Operator (driver) against hazardous substances — Part 3: Classification, requirements and test procedures
20.00
Agricultural tractors and self-propelled sprayers — Protection of the Operator (driver) against hazardous substances — Part 4: Filters — Requirements and test procedures
20.00
Agricultural tractors and self-propelled sprayers — Protection of the Operator (driver) against hazardous substances — Part 5: System verification
20.00
Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Dynamic test method and acceptance conditions
90.60
Agricultural tractors and self-propelled machines — Test method for enclosure pressurization systems
95.99
Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements
95.99
Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements
90.92
Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements
20.00
Tractors and machinery for agriculture — Seat belts — Part 3: Requirements for assemblies
90.60
Agricultural wheeled tractors — Determination of maximum travel speed
95.99
Agricultural wheeled tractors — Maximum speeds — Method of determination
90.93
Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration
95.99
Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration
90.93
Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator
95.99
Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator
90.60
Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator — Technical Corrigendum 1
60.60
Acoustics — Tractors and machinery for agriculture and forestry — Measurement of noise at the operator's position — Survey method
95.99
Tractors for agriculture and forestry — Measurement of noise at the operator's position — Survey method
90.60
Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Part 1: Strength test
95.99
Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Part 2: Wear test
95.99
Tractors and machinery for agriculture and forestry — Guards for power take-off drive shafts — Test methods
95.99
Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria
90.92
Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria
50.20
Trailed agricultural vehicles — Brakes and braking devices — Laboratory test method
95.99
Agricultural and forestry vehicles — Determination of braking performance
90.93
Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Static test method and acceptance conditions
95.99
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions
90.92
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions
50.20
Tractors and self-propelled machines for agriculture — Performance of heating and ventilation systems in closed cabs — Test method
95.99
Acoustics — Agricultural and forestry wheeled tractors and self-propelled machines — Measurement of noise emitted when in motion
95.99
Agricultural and forestry tractors — Measurement of noise emitted when in motion
90.60
Tractors and self-propelled machines for agriculture and forestry— Test method for performance of air-conditioning system
95.99
Agricultural wheeled tractors — Steering requirements
95.99
Agricultural and forestry tractors — Narrow-track wheeled tractors — Part 1: Front-mounted roll-over protective structures
95.99
Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 1: Front-mounted ROPS
95.99
Tractors for agriculture and forestry — Roll-over protective structures on narrow tractors — Part 1: Front-mounted ROPS
60.60
Agricultural and forestry tractors — Narrow-track wheeled tractors — Part 2: Rear-mounted roll-over protective structures
95.99
Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 2: Rear-mounted ROPS
95.99
Tractors for agriculture and forestry — Roll-over protective structures on narrow tractors — Part 2: Rear-mounted ROPS
60.60
Agricultural vehicles — Mechanical hook-type connections on towing vehicles — Test methods and requirements
90.93
Tractors and machinery for agriculture and forestry — Basic types — Vocabulary
95.99
Tractors and machinery for agriculture and forestry — Basic types — Vocabulary
60.60
Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 1: Vocabulary
90.60
Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 2: Heating, ventilation and air-conditioning test method and performance
90.60
Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 3: Determination of effect of solar heating
90.60
Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 4: Air filter element test method
90.60
Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 5: Pressurization system test method
90.60
Agricultural and forestry machinery — Electromagnetic compatibility — Part 1: General EMC requirements
50.00
Agricultural and forestry machinery — Electromagnetic compatibility — Part 2: Additional EMC requirements for functional safety
50.00
Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria
90.92
Tractors for agriculture and forestry — Falling object protective structures — Test procedures and performance requirements
90.93

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.