ISO 17925:2004

недоступно на русском языке

Последний раз этот стандарт был пересмотрен в 2019. Поэтому данная версия остается актуальной

Тезис

ISO 17925:2004 specifies methods of determining the coating mass per unit area by gravimetry and chemical composition on one side-surface of zinc- and/or aluminium-based coatings on steel by means of inductively coupled plasma atomic emission spectrometric or flame atomic absorption spectrometry.

This method is applicable to zinc contents between 40 % (mass fraction) and 100 % (mass fraction); aluminium contents between 0,02 % (mass fraction) and 60 % (mass fraction); nickel contents between 7 % (mass fraction) and 20 % (mass fraction); iron contents between 0,2 % (mass fraction) and 20 % (mass fraction); silicon contents between 0,2 % (mass fraction) and 10 % (mass fraction); lead contents between 0,005 % (mass fraction) and 2 % (mass fraction).

These test methods are intended as referee methods to test such materials for compliance with mass per unit area and compositional specifications of International Standards.

Общая информация

Текущий статус
: Опубликовано

Дата публикации
: 2004-11
Версия
: 1
Технический комитет
: ISO/TC 17/SC 1 Methods of determination of chemical composition
ICS
:
25.220.40 Metallic coatings

77.080.20 Steels