Reference number
ISO/IEC Guide 98-3:2008
© ISO 2024
Guide
ISO/IEC Guide 98-3:2008
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
Edition 1
2008-10
Guide
Preview
недоступно на русском языке
Опубликовано (Версия 1, 2008)
Последний раз этот публикация был пересмотрен в  2023. Поэтому данная версия остается актуальной.

ISO/IEC Guide 98-3:2008

Язык
Формат
CHF 216
Пересчитать швейцарские франки (CHF) в ваша валюта

The HTML version of JCGM 100, on which ISO/IEC Guide 98-3:2008 is based, can be found at http://www.iso.org/sites/JCGM/JCGM-introduction.htm.

The electronic version of this Guide can be downloaded from the ISO/IEC Directives and Guides web page.

Тезис

ISO/IEC Guide 98-3:2008 is a reissue of the 1995 version of the Guide to the Expression of Uncertainty in Measurement (GUM), with minor corrections. This Guide establishes general rules for evaluating and expressing uncertainty in measurement that can be followed at various levels of accuracy and in many fields — from the shop floor to fundamental research. The principles of this Guide are intended to be applicable to a broad spectrum of measurements, including those required for:

  • maintaining quality control and quality assurance in production;
  • complying with and enforcing laws and regulations;
  • conducting basic research, and applied research and development, in science and engineering;
  • calibrating standards and instruments and performing tests throughout a national measurement system in order to achieve traceability to national standards;
  • developing, maintaining, and comparing international and national physical reference standards, including reference materials.

Общая информация

  • Текущий статус
     : Опубликовано
    Дата публикации
     : 2008-10
    Исправленный вариант (английский)
     : 2010-11
    Этап
    : Подтверждение действия международного стандарта [90.93]
  • Версия
     : 1
  • Технический комитет :
    ISO/TMBG
    ICS :
    17.020 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

  2. Интернет-магазин
  3. Каталог стандартов
  4. МКС
  5. 17
  6. 17.020
  7. ISO/IEC Guide 98-3:2008