Reference number
ISO/TS 20458:2023
Technical Specification
ISO/TS 20458:2023
Road vehicles — Design and performance specifications for advanced Pedestrian Legform Impactor (aPLI)
Edition 1
2023-07
Technical Specification
Preview
ISO/TS 20458:2023
68101
недоступно на русском языке
Опубликовано (Версия 1, 2023)

ISO/TS 20458:2023

ISO/TS 20458:2023
68101
Язык
Формат
CHF 216
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document provides definitions, symbols, mechanical requirements, certification test procedure, electronic subsystem requirements and user’s manual for advanced pedestrian legform impactor (aPLI), a standardized pedestrian legform impactor with an upper mass for pedestrian subsystem testing of road vehicles. It is applicable to impact tests involving:

     vehicles of category M1, except vehicles with the maximum mass above 2 500 kg and which are derived from N1 category vehicles and where the driver’s position, R-point, is either forward of the front axle or longitudinally rearwards of the front axle transverse centreline by a maximum of 1 100 mm;

     vehicles of category N1, except where the driver’s position, R-point, is either forward of the front axle or longitudinally rearwards of the front axle transverse centreline by a maximum of 1 100 mm;

     impacts to the bumper test area as defined by UN R127[1] and UN GTR No.9[2];

     pedestrian subsystem tests involving use of a legform for the purpose of evaluating compliance with vehicle safety standards.

Общая информация

  •  : Опубликовано
     : 2023-07
    : Опубликование международного стандарта [60.60]
  •  : 1
  • ISO/TC 22/SC 36
    43.020 
  • RSS обновления

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

Появились вопросы?

Ознакомьтесь с FAQ