Reference number
ISO 16889:2022
International Standard
ISO 16889:2022
Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element
Edition 3
2022-01
Preview
ISO 16889:2022
77245
недоступно на русском языке
Опубликовано (Версия 3, 2022)

ISO 16889:2022

ISO 16889:2022
77245
Язык
Формат
CHF 173
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document describes the following:

—    a multi-pass filtration performance test with continuous contaminant injection for hydraulic fluid power filter elements;

NOTE 1   For the background interlaboratory study used to verify the test methodology, see Annex D.

—    a procedure for determining the contaminant capacity, particulate removal and differential pressure characteristics;

—    a test currently applicable to hydraulic fluid power filter elements that exhibit an average filtration ratio greater than or equal to 75 for particle sizes ≥ 25 µm(c), and a final reservoir gravimetric level of less than 200 mg/L;

NOTE 2   It is necessary to determine by validation the range of flow rates and the lower particle size limit that can be used in test facilities.

—    a test using ISO medium test dust (ISO MTD) contaminant and a test fluid in accordance with Annex A.

This document is intended to provide a test procedure that yields reproducible test data for appraising the filtration performance of a hydraulic fluid power filter element without influence of electrostatic charge.

This document applies to three test conditions:

—    test condition 1, with a base upstream gravimetric level of 3 mg/L;

—    test condition 2, with a base upstream gravimetric level of 10 mg/L;

—    test condition 3, with a base upstream gravimetric level of 15 mg/L.

Общая информация

  •  : Опубликовано
     : 2022-01
    : Опубликование международного стандарта [60.60]
  •  : 3
  • ISO/TC 131/SC 6
    23.100.60 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ