Filter :
Standard and/or project under the direct responsibility of ISO/TC 29/SC 9 Secretariat | Stage | ICS |
---|---|---|
Parallel shank jobber and stub series drills and Morse taper shank drills |
95.99 | |
Parallel shank jobber and stub series drills and Morse taper shank drills — Technical Corrigendum 1 |
95.99 | |
Parallel shank jobber and stub series drills and Morse taper shank drills |
90.93 | |
Hand reamers |
90.93 | |
Reamers — Part 2: Long fluted machine reamers with Morse taper shanks |
90.20 | |
Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares |
90.20 | |
Reduction sleeves and extension sockets for tools with Morse taper shanks |
90.93 | |
Drill chuck tapers |
90.20 | |
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels |
95.99 | |
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels |
90.60 | |
Shanks for turning and planing tools — Types and dimensions of the section |
95.99 | |
Shanks for turning and planing tools — Shapes and dimensions of the section |
90.60 | |
Carbide tips for brazing on turning tools |
95.99 | |
Carbide tips for brazing on turning tools |
90.93 | |
Turning tools with carbide tips — External tools |
95.99 | |
Turning tools with carbide tips — External tools |
90.93 | |
Machine tools — Self-holding tapers for tool shanks |
90.93 | |
7/24 tapers for tool shanks for manual changing |
90.60 | |
Parallel shank twist drills — Long series |
95.99 | |
Cylindrical shank twist drills — Long series |
95.99 | |
Cylindrical shank twist drills — Long series |
90.93 | |
Turning tools with carbide tips — Designation and marking |
90.93 | |
Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application |
95.99 | |
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application |
95.99 | |
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1 |
95.99 | |
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application |
95.99 | |
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application |
90.60 | |
Turning tools with carbide tips — Internal tools |
95.99 | |
Turning tools with carbide tips — Internal tools |
90.93 | |
Machine chucking reamers with parallel shanks or Morse taper shanks |
95.99 | |
Machine chucking reamers with cylindrical shanks and Morse taper shanks |
90.93 | |
Special tolerances for reamers |
90.93 | |
Short machine taps and hand taps |
95.99 | |
Short machine taps and hand taps |
90.93 | |
Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation |
90.93 | |
Milling machine arbors with 7/24 tapers — Part 2: Accessories |
90.20 | |
Centre drills for centre holes without protecting chamfers — Type A |
95.99 | |
Centre drills for centre holes without protecting chamfers — Type A |
90.60 | |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions |
95.99 | |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions |
90.20 | |
Machine tools — Morse taper shanks — Cotter slots with taper keys |
90.60 | |
End mills and slot drills — Part 1: Milling cutters with cylindrical shanks |
95.99 | |
End mills and slot drills — Part 1: Milling cutters with cylindrical shanks |
90.60 | |
End mills and slot drills — Part 2: Milling cutters with Morse taper shanks |
95.99 | |
End mills and slot drills — Part 2: Dimensions and designation of milling cutters with Morse taper shanks |
90.60 | |
End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks |
95.99 | |
End mills and slot drills — Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks |
90.93 | |
Indexable inserts for cutting tools — Designation |
95.99 | |
Indexable inserts for cutting tools — Designation |
95.99 | |
Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts |
95.99 | |
Indexable inserts for cutting tools — Designation |
95.99 | |
Indexable inserts for cutting tools — Designation — Technical Corrigendum 1 |
95.99 | |
Indexable inserts for cutting tools — Designation |
95.99 | |
Indexable inserts for cutting tools — Designation |
90.93 | |
Machine bridge reamers |
95.99 | |
Machine bridge reamers |
95.99 | |
Machine bridge reamers |
90.20 | |
Finishing reamers for morse and metric tapers, with parallel shanks and morse taper shanks |
95.99 | |
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks |
95.99 | |
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks |
90.60 | |
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps |
90.60 | |
Hand taps for parallel and taper pipe threads — General dimensions and marking |
95.99 | |
Hand taps for parallel and taper pipe threads — General dimensions and marking |
90.93 | |
Metal slitting saws with fine and coarse teeth — Metric series |
95.99 | |
Metal slitting saws with fine and coarse teeth — Metric series |
95.99 | |
Metal slitting saws with fine and coarse teeth — Metric series |
90.20 | |
Drills for use prior to tapping screw threads |
90.93 | |
Hacksaw blades — Part 2: Dimensions for machine blades |
90.93 | |
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers |
90.93 | |
Centre drills for centre holes with protecting chamfer — Type B |
95.99 | |
Centre drills for centre holes with protecting chamfer — Type B |
90.93 | |
Centre drills for centre holes with radius form — Type R |
95.99 | |
Centre drills for centre holes with radius form — Type R |
90.93 | |
Hand- and machine-operated circular screwing dies and hand-operated die stocks |
90.93 | |
Cylindrical cutters with plain bore and key drive — Metric series |
95.99 | |
Cylindrical cutters with plain bore and key drive — Metric series |
90.93 | |
Slotting cutters with plain bore and key drive — Metric series |
90.60 | |
Shell end mills with plain bore and tenon drive — Metric series |
90.93 | |
Side and face milling cutters with plain bore and key drive — Metric series |
90.60 | |
Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series |
95.99 | |
Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series |
90.20 | |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion |
90.93 | |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1 |
60.60 | |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Technical Corrigendum 1 |
60.60 | |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2 |
60.60 | |
Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm |
90.93 | |
Circular saw blades for woodworking — Dimensions |
90.93 | |
Milling cutters mounted on centring arbors having a 7/24 taper — Fitting dimensions — Centring arbors |
90.93 | |
Milling cutters mounted on centring arbors having a 7/24 taper — Inserted tooth cutters |
90.93 | |
Single point cutting tools — Corner radii |
95.99 | |
Single point cutting tools — Corner radii |
90.93 | |
Extra-long Morse taper shank twist drills |
95.99 | |
Extra-long Morse taper shank twist drills |
90.93 | |
Extra-long parallel shank twist drills |
95.99 | |
Extra-long parallel shank twist drills |
90.93 | |
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive |
95.99 | |
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive |
90.93 | |
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive |
95.99 | |
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive |
90.93 | |
Narrow bandsaw blades for woodworking — Dimensions |
90.93 | |
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive |
90.60 | |
T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole |
90.93 | |
Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks |
90.93 | |
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks |
90.20 | |
Cylindrical shanks for milling cutters — Part 3: Dimensional characteristics of threaded shanks |
90.93 | |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
95.99 | |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
95.99 | |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
95.99 | |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
90.93 | |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions |
95.99 | |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions |
90.60 | |
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads |
95.99 | |
Subland twist drills for holes prior to tapping screw threads |
90.93 | |
Subland twist drills with cylindrical shanks for holes prior to tapping screw threads |
95.99 | |
Hand taper pin reamers |
90.93 | |
Machine taper pin reamers with parallel shanks |
95.99 | |
Machine taper pin reamers with parallel shanks |
90.93 | |
Machine taper pin reamers with Morse taper shanks |
95.99 | |
Machine taper pin reamers with Morse taper shanks |
90.93 | |
Tool-life testing with single-point turning tools |
90.60 | |
Milling cutters — Nomenclature |
90.60 | |
Milling cutters — Nomenclature — Technical Corrigendum 1 |
60.60 | |
Inverse dovetail cutters and dovetail cutters with cylindrical shanks |
90.93 | |
Bore cutters with key drive — Form milling cutters with constant profile |
95.99 | |
Bore cutters with key drive — Form milling cutters with constant profile |
90.93 | |
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions |
90.93 | |
Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper |
90.20 | |
Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper |
90.20 | |
Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface |
90.20 | |
Tapered die-sinking cutters with parallel shanks |
90.60 | |
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks |
90.93 | |
Parallel shank tools — Driving tenons and sockets — Dimensions |
95.99 | |
Countersinks, 90 degrees, with Morse taper shanks and detachable pilots |
95.99 | |
Countersinks, 90°, with Morse taper shanks and detachable pilots |
90.93 | |
Countersinks, 90 degrees, with parallel shanks and solid pilots |
95.99 | |
Countersinks, 90°, with parallel shanks and solid pilots |
90.93 | |
Counterbores with parallel shanks and solid pilots |
95.99 | |
Counterbores with parallel shanks and solid pilots |
90.93 | |
Counterbores with Morse taper shanks and detachable pilots |
95.99 | |
Counterbores with Morse taper shanks and detachable pilots |
90.93 | |
Detachable pilots for use with counterbores and 90 degrees countersinks — Dimensions |
95.99 | |
Hand- and machine-operated circular screwing dies for taper pipe threads — R series |
95.99 | |
Hand- and machine-operated circular screwing dies for taper pipe threads — R series |
90.93 | |
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series |
95.99 | |
Hand- and machine-operated circular screwing dies for parallel pipe threads — G series |
90.93 | |
Jig bushes — Definitions and nomenclature |
90.93 | |
Metal cutting band saw blades — Part 1: Definitions and terminology |
95.99 | |
Metal-cutting band saw blades — Part 1: Vocabulary |
90.93 | |
Metal cutting band saw blades — Part 2: Basic dimensions and tolerances |
95.99 | |
Metal-cutting band saw blades — Part 2: Characteristics and dimensions |
90.93 | |
Hardmetal heading dies — Terminology |
90.93 | |
As-sintered hardmetal pellets used in heading dies — Dimensions and tolerances |
90.93 | |
Machine tools — Positive drive of Morse tapers |
90.93 | |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks |
90.20 | |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation |
90.93 | |
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw |
90.93 | |
Twist drills — Terms, definitions and types |
90.60 | |
Twist drills — Terms, definitions and types — Technical Corrigendum 1 |
60.60 | |
Reamers — Terms, definitions and types |
90.20 | |
Ground high speed steel tool bits |
90.93 | |
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions |
95.99 | |
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions |
90.93 | |
Turning and copying tool holders and cartridges for indexable inserts — Designation |
95.99 | |
Turning and copying tool holders and cartridges for indexable inserts — Designation |
95.99 | |
Turning and copying tool holders and cartridges for indexable inserts — Designation |
90.93 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 1: Designation, styles, dimensions and calculation for corrections |
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 2: Style F |
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 3: Style K |
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 4: Style L |
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 5: Style U |
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 6: Style Q |
90.60 | |
Boring bars for indexable inserts — Dimensions |
95.99 | |
Boring bars for indexable inserts — Dimensions |
95.99 | |
Boring bars for indexable inserts — Dimensions — Amendment 1 |
95.99 | |
Boring bars for indexable inserts — Dimensions |
95.99 | |
Boring bars for indexable inserts — Dimensions |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 2: Style A |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 2: Style A |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 3: Style B |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 3: Style B |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 4: Style D |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 4: Style D |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 5: Style F |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 5: Style F |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 6: Style G |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 6: Style G |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 7: Style J |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 7: Style J |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 8: Style K |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 8: Style K |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 9: Style L |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 9: Style L |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 10: Style N |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 10: Style N |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 11: Style R |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 11: Style R |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 12: Style S |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 12: Style S |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 13: Style T |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 13: Style T |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 14: Style H |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 14: Style H |
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 15: Style V |
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 15: Style V |
90.93 | |
Single point tool holders for turning and copying, for indexable inserts — Dimensions |
95.99 | |
Single-point tool holders for turning and copying, for indexable inserts — Dimensions |
95.99 | |
Single-point tool holders for turning and copying, for indexable inserts — Dimensions — Amendment 1 |
95.99 | |
Single-point tool holders for turning and copying, for indexable inserts — Dimensions |
95.99 | |
Single-point tool holders for turning and copying, for indexable inserts — Dimensions |
95.99 | |
Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions |
90.60 | |
Cartridges, type A, for indexable inserts — Part 2: Style F |
90.60 | |
Cartridges, type A, for indexable inserts — Part 3: Style G |
90.60 | |
Cartridges, type A, for indexable inserts — Part 4: Style J |
90.60 | |
Cartridges, type A, for indexable inserts — Part 5: Style K |
90.60 | |
Cartridges, type A, for indexable inserts — Part 6: Style L |
90.60 | |
Cartridges, type A, for indexable inserts — Part 7: Style R |
90.60 | |
Cartridges, type A, for indexable inserts — Part 8: Style S |
90.60 | |
Cartridges, type A, for indexable inserts — Part 9: Style T |
90.60 | |
Cartridges, type A, for indexable inserts — Part 10: Style U |
90.60 | |
Cartridges, type A, for indexable inserts — Part 11: Style W |
90.60 | |
Cartridges, type A, for indexable inserts — Part 12: Style Y |
90.60 | |
Cartridges, type A, for indexable inserts — Dimensions — Addendum 1 |
95.99 | |
Cartridges, type A, for indexable inserts — Dimensions |
95.99 | |
Cartridges, type A, for indexable inserts — Dimensions |
95.99 | |
Tapered polygonal interface with flat contact surface — Part 1: Shanks of type F, H and A |
40.60 | |
Tapered polygonal interface with flat contact surface — Part 2: Receivers of type F, H, A and X for shanks of type F, H and A |
40.60 | |
Tapered polygonal interface with flat contact surface — Part 3: Coupling for driven tool holders with shanks of type F and A |
40.60 | |
Taps and thread cutting — Nomenclature of the main types and terminology |
90.93 | |
Circular screwing dies — Terminology |
90.60 | |
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion |
90.93 | |
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion — Technical Corrigendum 1 |
60.60 | |
Double equal angle cutters with plain bore and key drive |
95.99 | |
Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation |
95.99 | |
Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation |
95.99 | |
Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation |
95.99 | |
End mills with indexable inserts — Part 1: End mills with flatted parallel shank |
95.99 | |
End mills with indexable inserts — Part 1: End mills with flatted cylindrical shank |
90.20 | |
End mills with indexable inserts — Part 2: End mills with Morse taper shank |
95.99 | |
End mills with indexable inserts — Part 2: End mills with Morse taper shank |
90.20 | |
Face milling cutters with indexable inserts — Dimensions |
95.99 | |
Face and shoulder milling cutters with indexable inserts — Dimensions |
90.93 | |
Side and face milling (slotting) cutters with indexable inserts — Dimensions |
95.99 | |
Side and face milling (slotting) cutters with indexable inserts — Dimensions |
90.20 | |
Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance |
95.99 | |
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance |
95.99 | |
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts |
95.99 | |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions |
95.99 | |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions |
90.60 | |
Core drills with parallel shanks and with Morse taper shanks |
95.99 | |
Core drills with parallel shanks and with Morse taper shanks |
90.93 | |
Hexagonal dienuts |
90.60 | |
Saw teeth for woodworking saws — Profile shape — Terminology and designation |
90.60 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions |
95.99 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
90.93 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics |
95.99 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF |
90.93 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF |
95.99 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF |
90.60 | |
Bore type milling cutters for indexable inserts — Designation |
95.99 | |
Hardmetal burrs — Part 1: General specifications |
95.99 | |
Hardmetal burrs — Part 1: General specifications |
90.20 | |
Hardmetal burrs — Part 2: Cylindrical burrs (style A) |
95.99 | |
Hardmetal burrs — Part 2: Cylindrical burrs (style A) |
90.20 | |
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C) |
95.99 | |
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C) |
90.20 | |
Hardmetal burrs — Part 4: Spherical burrs (style D) |
95.99 | |
Hardmetal burrs — Part 4: Spherical burrs (style D) |
90.20 | |
Hardmetal burrs — Part 5: Oval burrs (style E) |
95.99 | |
Hardmetal burrs — Part 5: Oval burrs (style E) |
90.20 | |
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F) |
95.99 | |
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F) |
90.20 | |
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G) |
95.99 | |
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G) |
90.20 | |
Hardmetal burrs — Part 8: Flame burrs (style H) |
95.99 | |
Hardmetal burrs — Part 8: Flame burrs (style H) |
90.20 | |
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K) |
95.99 | |
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K) |
90.20 | |
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L) |
95.99 | |
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L) |
90.20 | |
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M) |
95.99 | |
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M) |
90.20 | |
Hardmetal burrs — Part 12: Inverted cone burrs (style N) |
95.99 | |
Hardmetal burrs — Part 12: Inverted cone burrs (style N) |
90.20 | |
Shank type milling cutters for indexable inserts — Designation |
95.99 | |
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess |
95.99 | |
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess |
90.93 | |
Tool life testing in milling — Part 1: Face milling |
90.60 | |
Tool life testing in milling — Part 2: End milling |
90.60 | |
High-speed steel machine taps with ground threads — Technical specifications |
90.20 | |
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF |
90.93 | |
7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF |
90.93 | |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole |
95.99 | |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole |
90.93 | |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole |
95.99 | |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole |
90.93 | |
Machine tools — Front faces of spindle holders for machining centres — Functional dimensions |
90.60 | |
Drills with indexable inserts — Cylindrical shanks with a parallel flat |
95.99 | |
Drills with indexable inserts — Cylindrical shanks with a parallel flat |
90.60 | |
End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank |
95.99 | |
End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank |
90.93 | |
End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank |
95.99 | |
End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank |
90.93 | |
Dimensions of accessories for cutter arbors with parallel key and tenon drive |
90.93 | |
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions |
90.93 | |
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface |
90.93 | |
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer |
90.93 | |
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer |
90.93 | |
Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface |
90.60 | |
Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system |
90.60 | |
Key type three-jaw drill chucks — Specification |
90.60 | |
Keyless type three-jaw drill chucks — Specification |
90.60 | |
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions |
90.93 | |
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs |
90.93 | |
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat |
90.93 | |
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat |
90.93 | |
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat |
90.93 | |
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat |
90.93 | |
Tool holders with cylindrical shank — Part 7: Type F with taper seat |
90.93 | |
Tool holders with cylindrical shank — Part 8: Type Z, accessories |
90.93 | |
Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts |
90.93 | |
Spot drills |
95.99 | |
Spot drills |
90.93 | |
High-speed steel two-flute twist drills — Technical specifications |
90.20 | |
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers |
90.93 | |
Solid hardmetal end mills with parallel shank — Dimensions |
95.99 | |
Solid hardmetal end mills with cylindrical shank — Dimensions |
95.99 | |
Solid hardmetal end mills with cylindrical shank — Dimensions |
90.60 | |
Cutting tools — Designation of high-speed steel groups |
95.99 | |
Cutting tools — Designation of high-speed steel groups |
90.60 | |
Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation |
95.99 | |
Milling cutters — Designation — Part 1: Shank type end mills of solid or tipped design |
95.99 | |
Milling cutters — Designation — Part 1: Shank-type end mills of solid or tipped design |
95.99 | |
Milling cutters — Designation — Part 2: Shank type and bore type milling cutters with indexable inserts |
95.99 | |
Milling cutters — Designation — Part 2: Shank-type and bore-type milling cutters with indexable inserts |
95.99 | |
Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges |
90.20 | |
Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions |
95.99 | |
Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB |
60.60 | |
Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions |
95.99 | |
Hollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB |
60.60 | |
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools |
95.99 | |
Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U |
60.60 | |
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools |
95.99 | |
Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U |
60.60 | |
Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES |
60.60 | |
Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES |
60.60 | |
Woodruff keaseat cutters — Dimensions |
95.99 | |
Woodruff keyseat cutters — Dimensions |
90.93 | |
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions |
90.93 | |
Milling cutters for high speed machining — Safety requirements |
90.20 | |
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials — Dimensions |
95.99 | |
Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials |
90.60 | |
Cubic boron nitride inserts, tipped or solid — Dimensions, types |
95.99 | |
Cubic boron nitride inserts, tipped or solid — Dimensions, types |
90.93 | |
Polycristalline diamond inserts, tipped — Dimensions, types |
95.99 | |
Polycristalline diamond inserts, tipped — Dimensions, types |
90.93 | |
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions |
90.93 | |
CVD diamond tools — Categorization |
60.60 | |
Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series |
60.60 | |
Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series |
60.60 | |
Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers |
90.20 | |
Modular taper interface with ball track system — Part 3: Part 3: Dimensions of shanks, four locking elements |
30.60 | |
Modular taper interface with ball track system — Part 4: Part 4: Dimensions ofreceivers, four locking elements |
30.60 | |
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks |
95.99 | |
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks |
60.60 | |
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers |
90.93 |
No matching records found. Please try changing the filter settings.