Filter :
Standard and/or project under the direct responsibility of ISO/TC 61/SC 4 Secretariat | Stage | ICS |
---|---|---|
Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
|
95.99 | |
Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material
|
95.99 | |
Plastics — Determination of ignition temperature using a hot-air furnace
|
95.99 | |
Plastics — Determination of ignition temperature using a hot-air furnace
|
95.99 | |
Plastics — Determination of ignition temperature using a hot-air furnace
|
60.60 | |
Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame
|
95.99 | |
Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
|
95.99 | |
Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
|
95.99 | |
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
|
90.93 | |
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
95.99 | |
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1
|
95.99 | |
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
90.93 | |
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
|
95.99 | |
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
|
90.93 | |
Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test
|
60.60 | |
Plastics — Determination of flammability by oxygen index
|
95.99 | |
Plastics — Smoke generation — Part 1: Guidance on optical-density testing
|
95.99 | |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
95.99 | |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1
|
95.99 | |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
95.99 | |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
95.99 | |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
90.92 | |
Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method
|
95.99 | |
Plastics — Smoke generation — Determination of optical density by a single-chamber test
|
40.20 | |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
95.99 | |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
95.99 | |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1: Specimens
|
95.99 | |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
95.99 | |
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
|
60.60 | |
Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source
|
95.99 | |
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
|
95.99 | |
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens
|
95.99 | |
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small flame ignition source
|
60.60 | |
Lighters — Safety specification
|
95.99 | |
Lighters — Safety specifications
|
90.92 | |
Lighters — Safety specifications
|
30.00 |
|
Plastics — Fire tests — Standard ignition sources
|
95.99 | |
Plastics — Fire tests — Standard ignition sources
|
95.99 | |
Plastics — Fire tests — Standard ignition sources
|
95.99 | |
Plastics — Fire tests — Standard ignition sources
|
95.99 | |
Plastics — Fire tests — Standard ignition sources
|
60.60 | |
Plastics — Determination of the combustibility of specimens using a 125 mm flame source
|
95.99 | |
Plastics — Survey of ignition sources used for national and international fire tests
|
95.99 | |
Plastics — Guidance for the use of standard fire tests
|
95.99 | |
Plastics — Burning behaviour — Guidance for development and use of fire tests
|
95.99 | |
Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1
|
95.99 | |
Plastics — Guidance for the use of standard fire tests
|
90.92 | |
Plastics — Guidance for the use of standard fire tests
|
20.00 |
|
Plastics — Guidance for the use of standard fire tests
|
30.98 |
|
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance
|
95.99 | |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability
|
90.20 | |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method
|
95.99 | |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace
|
95.99 | |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater
|
90.60 | |
Plastics — Vertical flame spread determination for film and sheet
|
95.99 | |
Plastics — Vertical flame spread determination for film and sheet
|
90.93 | |
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
|
95.99 | |
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
|
95.99 | |
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
|
60.60 | |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
|
95.99 | |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
|
90.20 | |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
|
95.99 | |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
|
60.60 | |
Plastics — Guidance on fire characteristics and fire performance of PVC materials used in building applications
|
60.60 | |
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
|
90.93 | |
Utility lighters — General consumer-safety requirements
|
95.99 | |
Utility lighters — Safety specifications
|
90.92 | |
Utility lighters — Safety specifications
|
30.00 |
|
Plastics — Fire performance test on water-filled plastic pipes
|
30.20 |
|
Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
|
30.98 | |
Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
|
60.60 | |
Plastics — Application of spread of flame test to plastic pipes
|
60.60 | |
Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
|
90.93 | |
Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
|
90.60 | |
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods
|
95.99 | |
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods
|
95.99 | |
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1
|
95.99 | |
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1
|
95.99 |
No matching records found. Please try changing the filter settings.