Plastics — Determination of water absorption

Plastics — Determination of water absorption

Plastics — Determination of water absorption

Plastics — Determination of the effects of liquid chemicals, including water

Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals

Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals

Plastics — Determination of loss of plasticizers — Activated carbon method

Plastics — Determination of loss of plasticizers — Activated carbon method

Plastics — Determination of migration of plasticizers

Plastics — Determination of migration of plasticizers

Plastics — Standard atmospheres for conditioning and testing

Plastics — Standard atmospheres for conditioning and testing

Plastics — Standard atmospheres for conditioning and testing — Technical Corrigendum 1

Plastics — Standard atmospheres for conditioning and testing

Plastics — Standard atmospheres for conditioning and testing

Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value

Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value

Plastics — Determination of behaviour under the action of fungi and bacteria — Evaluation by visual examination or measurement of change in mass or physical properties

Plastics — Evaluation of the action of microorganisms

Plastics — Evaluation of the action of microorganisms

Plastics — Evaluation of the action of microorganisms

Plastics — Methods of exposure to solar radiation — Part 1: General guidance

Plastics — Methods of exposure to solar radiation — Part 1: General guidance

Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass

Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass

Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation

Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation

Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation

Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors

Plastics — Determination of time-temperature limits after prolonged exposure to heat

Plastics — Polypropylene granules — Determination of thermal stability in air by pH method

Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light

Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources

Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources

Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources

Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources

Plastics — Determination of resistance to environmental stress cracking (ESC) — Bent strip method

Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method

Plastics — Methods of exposure to natural weathering

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

Chemically-induced ultra-weak photon emission (UPE) — Measurement as an analysis method of degradation of polymeric material

Plastics — Method of exposure to electrodeless plasma radiation sources

Measurement method of anti-biofilm activity on plastic and other non-porous surfaces

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps — Technical Corrigendum 1

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Plastics — Test method of exposure to white LED lamps

Plastics — Determination of environmental stress cracking (ESC) — Constant-tensile-stress method

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy

Plastics — Methods for marine exposure

Plastics — Methods for marine exposure

Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations

Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations

Plastics — Standard table for reference global solar spectral irradiance at sea level — Horizontal, relative air mass 1

Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance

Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions

Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions

Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions

Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear

Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation

Plastics — Test method for exposing polyolefins outdoors combining natural weathering and artificial irradiation

Measurement of antiviral activity on plastics and other non-porous surfaces

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 1: General guidance

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 2: Constant tensile load method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 4: Ball or pin impression method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 5: Constant tensile deformation method

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 6: Slow strain rate method

Plastics — Measurement of antibacterial activity on plastics surfaces

Measurement of antibacterial activity on plastics and other non-porous surfaces

Plastics — Determination of apparent activation energies of property changes in standard weathering test methods

Plastics — Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus

Plastics — Artificial weathering including acidic deposition