Reference number
ISO/IEC 21410:2001
International Standard
ISO/IEC 21410:2001
Information technology — Telecommunications and information exchange between systems — Corporate telecommunication networks — Signalling interworking between QSIG and H.323 — Call transfer supplementary services
Edition 1
2001-08
Read sample
ISO/IEC 21410:2001
34503
Published (Edition 1, 2001)
This publication was last reviewed and confirmed in 2006. Therefore this version remains current.

ISO/IEC 21410:2001

ISO/IEC 21410:2001
34503
Language
Format
CHF 173
Convert Swiss francs (CHF) to your currency
The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) web site

Abstract

This International Standard specifies signalling interworking between "QSIG" and "H.323" in support of the call transfer

supplementary services within a Corporate telecommunication Network (CN).

"QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated Services eXchanges (PINX)

within a Private Integrated Services Network (PISN). The Q reference point is defined in ISO/IEC 11579-1. A PISN provides

circuit-switched basic services and supplementary services to its users. QSIG is specified in other Standards, in particular

ISO/IEC 11572 (call control in support of basic services), ISO/IEC 11582 (generic functional protocol for the support of

supplementary services) and a number of standards specifying individual supplementary services. ISO/IEC 13869 specifies the

QSIG protocol in support of call transfer by consultation and ISO/IEC 19460 specifies the QSIG protocol in support of single

step call transfer.

"H.323" is a set of signalling protocols for the support of voice or multimedia communication within a packet network, in

particular a packet network that uses the Internet Protocol (IP) as its network layer protocol (IP network). H.323 signalling

protocols operate between endpoints in an IP network, either indirectly via one or more gatekeepers, or directly. An endpoint

can be a terminal or a gateway to another network. H.323 is an "umbrella" recommendation referring to various ITU-T

recommendations, in particular Recommendations H.225.0 and H.245 (basic communication capabilities) and

Recommendation H.450.1 (generic functional protocol for the support of supplementary services). Recommendation H.450.2

specifies the H.323 protocol in support of call transfer.

NOTE - H.450.2 applies only to the 1998 version of H.323 (also known as H.323 version 2) and to later versions.

Call transfer by consultation, as supported by ISO/IEC 13869, is a supplementary service that enables a user (user A) to

transform two of that user's calls (at least one of which must be answered) into a new call between the two other users in the two

calls (users B and C).

Single step call transfer, as supported by ISO/IEC 19460, is a supplementary service that enables a user (user A) to transform

an existing call between user A and user B into a new call between user B and user C without user A needing to establish a call

with user C prior to transfer.

Call transfer, as supported by H.450.2, is a supplementary service that enables the served user (user A) to transform an existing

call with a second user (user B) into a new call between user B and a third user (user C) selected by user A. User A may or may

not have a call established with user C prior to call transfer. If a call is already established between user A and user C, this is

known as transfer by consultation and is equivalent to call transfer as supported by ISO/IEC 13869. If a call is not already

established between user A and user C, this is known as single step call transfer and is equivalent to call transfer as supported

by ISO/IEC 19460.

Interworking between QSIG and H.323 permits a call originating at a user of a PISN to terminate at a user of an IP network, or

a call originating at a user of an IP network to terminate at a user of a PISN. This International Standard provides the following

additional capabilities:

_ a PISN user with two calls established, at least one of which being to or from a user in an IP network, to be able to

transform those two calls into a new call between the other two users involved;

_ a PISN user with a call established to or from a user in an IP network to be able to transform that call into a new call

between the IP network user and a third user selected by the PISN user, that third user being either in the IP network or in

the PISN;

_ a PISN user with a call established to a second PISN user to be able to transfer that call into a new call between the second

user and a third user selected by the first user, that third user being in an IP network;

_ an IP network user with two calls established, at least one of which being to or from a user in a PISN, to be able to

transform those two calls into a new call between the other two users involved;

_ an IP network user with a call established to or from a user in a PISN to be able to transform that call into a new call

between the PISN user and a third user selected by the IP network user, that third user being either in the IP network or in

the PISN; and

ISO/IEC 21410:2001(E)

2 © ISO/IEC 2001 ? All rights reserved

_ an IP network user with a call established to a second user in the IP network to be able to transfer that call into a new call

between the second user and a third user selected by the first user, that third user being in a PISN.

This International Standard is applicable to any interworking unit that can act as a gateway between a PISN employing QSIG

and an IP network employing H.323.

General information

  •  : Published
     : 2001-08
    : International Standard confirmed [90.93]
  •  : 1
     : 50
  • ISO/IEC JTC 1/SC 6
    33.040.35 
  • RSS updates

Got a question?

Check out our Help and Support