Reference number
ISO 13232-6:2005
International Standard
ISO 13232-6:2005
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 6: Full-scale impact-test procedures
Edition 2
2005-12
Read sample
ISO 13232-6:2005
37426
Published (Edition 2, 2005)
This publication was last reviewed and confirmed in 2020. Therefore this version remains current.
This standard has 1 amendment.

ISO 13232-6:2005

ISO 13232-6:2005
37426
Language
Format
CHF 173
Convert Swiss francs (CHF) to your currency

Abstract

ISO 13232-6:2005 specifies minimum requirements for:

  • paired comparison tests;
  • the preparation of the dummy, motorcycle and opposing vehicle;
  • the repeatability and reproducibility of impact test conditions within and between test sites;
  • the minimization of variation in secondary test variables;
  • realistic and representative impact conditions for full-scale impact tests; and
  • a means to verify analytical evaluations of proposed rider crash protective devices fitted to motorcycles, such as computer simulation.

ISO 13232 specifies the minimum requirements for research into the feasibility of protective devices fitted to motorcycles, which are intended to protect the rider in the event of a collision.

ISO 13232 is applicable to impact tests involving:

  • two-wheeled motorcycles;
  • the specified type of opposing vehicle;
  • either a stationary and a moving vehicle or two moving vehicles;
  • for any moving vehicle, a steady speed and straight-line motion immediately prior to impact;
  • one helmeted dummy in a normal seating position on an upright motorcycle;
  • the measurement of the potential for specified types of injury by body region;
  • evaluation of the results of paired impact tests (i.e. comparisons between motorcycles fitted and not fitted with the proposed devices); and
  • evaluation of inflatable/triggered protective device.

ISO 13232-6 does not apply to testing for regulatory or legislative purposes.

General information

  •  : Published
     : 2005-12
    : International Standard confirmed [90.93]
  •  : 2
     : 50
  • ISO/TC 22/SC 38
    43.140 
  • RSS updates

 Amendments

Amendments are issued when it is found that new material may need to be added to an existing standardization document. They may also include editorial or technical corrections to be applied to the existing document.

Amendment 1

MATD test helmet

Edition 2012

ISO 13232-6:2005/Amd 1:2012
57249
Language
Format
CHF 18
Convert Swiss francs (CHF) to your currency

Life cycle

Got a question?

Check out our Help and Support