International Standard
ISO 13232-7:2005
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
Reference number
ISO 13232-7:2005
ISO 13232-7:2005
Edition 2
2005-12
2005-12
© ISO 2024
International Standard
p
ISO 13232-7:2005
37427
Published
(Edition 2, 2005)
This standard was last reviewed and confirmed in 2021.
Therefore this version remains current.
This standard has 2 amendments.
Abstract
The purposes of ISO 13232-7:2005 are to provide:
- conventions for calibrating and documenting the important features of the simulation models;
- guidelines for definition and use of mathematical models for motorcycle impact simulations, which can be correlated against data for full-scale tests;
- a means for identifying possible additional impact conditions for full-scale testing; and
- a standardized tool, of optional use, for risk/benefit analysis of rider crash protective devices fitted to motorcycles, based upon the population of impact conditions identified in ISO 13232-2.
ISO 13232 specifies the minimum requirements for research into the feasibility of protective devices fitted to motorcycles, which are intended to protect the rider in the event of a collision.
ISO 13232 is applicable to impact tests involving:
- two-wheeled motorcycles;
- the specified type of opposing vehicle;
- either a stationary and a moving vehicle or two moving vehicles;
- for any moving vehicle, a steady speed and straight-line motion immediately prior to impact;
- one helmeted dummy in a normal seating position on an upright motorcycle;
- the measurement of the potential for specified types of injury by body region; and
- evaluation of the results of paired impact tests (i.e. comparisons between motorcycles fitted and not fitted with the proposed devices).
ISO 13232 does not apply to testing for regulatory or legislative purposes.
General information
-
Status: PublishedPublication date: 2005-12Stage: International Standard confirmed [90.93]
-
Edition: 2Number of pages: 27
-
Technical Committee :ISO/TC 22/SC 38ICS :43.140
- RSS updates
Amendments
Amendments are issued when it is found that new material may need to be added to an existing standardization document. They may also include editorial or technical corrections to be applied to the existing document.
Life cycle
-
Previously
WithdrawnISO 13232-7:1996
-
Now
-
00
Preliminary
-
10
Proposal
-
20
Preparatory
-
30
Committee
-
40
Enquiry
-
50
Approval
-
60
Publication
-
90
Review
-
95
Withdrawal
Amendments
Provide additional content; Available for purchase; Not included in the text of the existing standard.PublishedISO 13232-7:2005/Amd 1:2012
PublishedISO 13232-7:2005/Amd 2:2023
-
00
Got a question?
Check out our FAQs
Customer care
+41 22 749 08 88
Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)