Reference number
ISO/TS 17951-2:2016
Technical Specification
ISO/TS 17951-2:2016
Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 2: Method using continuous flow analysis (CFA) with automated in-line distillation
Edition 1
2016-07
Technical Specification
Read sample
ISO/TS 17951-2:2016
71105
Published (Edition 1, 2016)
This publication was last reviewed and confirmed in 2023. Therefore this version remains current.

ISO/TS 17951-2:2016

ISO/TS 17951-2:2016
71105
Language
Format
CHF 96
Convert Swiss francs (CHF) to your currency

Abstract

ISO/TS 17951-2:2016 specifies a method for the determination of fluoride in waters, waste waters and effluents by continuous flow analysis (CFA). Any insoluble or complexed fluoride is converted to fluoride ion by an automated continuous flow distillation procedure from sulfuric/phosphoric acid. Fluoride ion in the distillate is measured using flow analysis with lanthanum alizarin complexone and spectrometric detection. This method is applicable to industrial waste waters, effluents, surface waters, ground waters, leachates. When this method is applied to the analysis of drinking water, a heater and a distillation unit is unnecessary. Some drinking water contains high concentration of aluminium and iron. In the case of drinking water, ISO/TS 17951-2:2016 is appropriate to drinking water with low interferences. It is not applicable to samples which contain large amount of suspended matter.

In ISO/TS 17951-2:2016, two working ranges are described:

- working range I: 0,1 mg/l to 1,0 mg/l;

- working range II: 1,0 mg/l to 10 mg/l.

The specification of the calibration solutions are to be adapted accordingly.

General information

  •  : Published
     : 2016-07
    : International Standard confirmed [90.93]
  •  : 1
     : 16
  • ISO/TC 147/SC 2
    13.060.50 
  • RSS updates

Got a question?

Check out our Help and Support