Reference number
ISO 5597:2018
International Standard
ISO 5597:2018
Hydraulic fluid power — Cylinders — Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
Edition 3
2018-05
Read sample
ISO 5597:2018
74704
Published (Edition 3, 2018)
This publication was last reviewed and confirmed in 2023. Therefore this version remains current.

ISO 5597:2018

ISO 5597:2018
74704
Language
Format
CHF 96
Convert Swiss francs (CHF) to your currency

Abstract

ISO 5597:2018 establishes the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder rod and piston seal housings for reciprocating applications in the following range of dimensions:

- for cylinders of 16 mm to 500 mm;

- for rods of 6 mm to 450 mm.

An additional range of seal housings is detailed in this document to meet the reduced envelope requirements of the 160 bar (16 MPa)[1] compact series of ISO 6020‑2; these smaller section seals require stricter piston rod and cylinder bore tolerances. The range of dimensions is as follows:

- cylinders of 25 mm to 200 mm;

- rods of 12 mm to 140 mm.

ISO 5597:2018 does not give details of seal design, since the manner of construction of seals varies with each manufacturer. The design and material of the seal and any incorporated anti-extrusion components are determined by conditions such as temperature and pressure.

ISO 5597:2018 only applies to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics.

[1] 1 bar = 100 kPa = 105 Pa = 0,1 MPa; 1 Pa = 1 N/m2.

General information

  •  : Published
     : 2018-05
    : International Standard confirmed [90.93]
  •  : 3
     : 16
  • ISO/TC 131/SC 7
    23.100.20 
  • RSS updates

Got a question?

Check out our Help and Support